List of recent papers in IEEJ Journal of Industry Application for your reference (2020.10.15)

　　　　　　　　　　Editor in Chief, IEEJ Journal of Industry Application

Tomoki Yokoyama

———————————————————————————–

We are pleased to inform you a list of papers in two years of IEEJ Journal of Industry Applications. This list can help you to make a paper when you submit it to the international conferences, and/or to the Journal of Power Electronics, and/ or to the IEEE transactions. Please copy and paste the following reference when you refer the paper.

Now, papers in IEEJ Journal of Industry Applications are able to free download from the website:

 https://www.jstage.jst.go.jp/browse/ieejjia 

######## New Coming: (Vol.9, No.5) ########

###########################################
[D6: Power Electronics and Its Applications]

[DC Railway Simulation]
Tsutomu Miyauchi, Motonari Suzuki, Tetsuya Kato, Hirotaka Takahashi, “Improvement of DC Railway Simulation Using Iteration History-of-Convergence Calculation”, IEEJ J. Industry Applications, vol.9, no.5, pp.486–496, 2020.
[Keywords: DC railway simulation, convergence calcuration]

    https://www.jstage.jst.go.jp/article/ieejjia/9/5/9_486/_pdf/-char/en

[Synchronous Rectification for CLLC Resonant Converter]
Kai Sun, Yucheng Gao, Huan Chen, “Bi-Directional High-Conversion-Ratio CLLC Resonant Converter with a New Synchronous Rectification Scheme for Low Conduction Loss”, IEEJ J. Industry Applications, vol.9, no.5, pp.515–522, 2020.
[Keywords: CLLC resonant converter, phase shift, synchronous rectification, high-step-down]

    https://www.jstage.jst.go.jp/article/ieejjia/9/5/9_515/_pdf/-char/en

[FPGA Controller Design]
Hwa-Pyeong Park, Yesung Kang, Seokhyeong Kang, Jee-Hoon Jung, “FPGA Controller Design for High-Frequency LLC Resonant Converters”, IEEJ J. Industry Applications, vol.9, no.5, pp.523–529, 2020.
[Keywords: LLC resonant converter, Digital Signal Processor(DSP), field programmable gate array(FPGA), dynamic performance]

    https://www.jstage.jst.go.jp/article/ieejjia/9/5/9_523/_pdf/-char/en

[Transformerless Inverter for Single-Phase PV Systems]
Saad Ul Hasan, Hassan Athab Hassan, Mark John Scott, Yam Prasad Siwakoti, Graham Town, Frede Blaabjerg, “Common-Ground Transformerless Inverter with Virtual DC Bus Concept for Single-Phase PV Systems”, IEEJ J. Industry Applications, vol.9, no.5, pp.538–548, 2020.
[Keywords: common mode(CM) current, photovoltaic(PV) systems, transformerless inverter, unipolar sinusoidal pulse width modulation(SPWM), virtual DC bus ]

    https://www.jstage.jst.go.jp/article/ieejjia/9/5/9_538/_pdf/-char/en

[Winding Optimization for Inductor and Transformer]
Zhan Shen, Zhiguang Li, Long Jin, Huai Wang, “An Approximation Model of AC Resistance for Inductor and Transformer Windings with Partial Layers”, IEEJ J. Industry Applications, vol.9, no.5, pp.549–556, 2020.
[Keywords: winding resistance, transformers, inductors, partial layer windings, winding optimization]

    https://www.jstage.jst.go.jp/article/ieejjia/9/5/9_549/_pdf/-char/en

[Turn-off Performance of Si-IGBT Device ]
Fumio Yukawa, Taku Takaku, Koji Yano, “Effect of Negative Gate Voltage on the Turn-off Performance of Si-IGBT Device”, IEEJ J. Industry Applications, vol.9, no.5, pp.557–562, 2020.
[Keywords: IGBT, turn-off, negative gate voltage, dv/dt, correction factor]

    https://www.jstage.jst.go.jp/article/ieejjia/9/5/9_557/_pdf/-char/en

[Modular Differential Inverter for Grid Connected Applications]
Ahmed Shawky, Mahmoud A. Sayed, Takaharu Takeshita, “Analysis and Experimentation of Modular Differential Inverter Utilizing SEPIC Modules and SIC Devices for Grid Connected Applications”, IEEJ J. Industry Applications, vol.9, no.5, pp.573–583, 2020.
[Keywords: modular inverter, differential topology, SEPIC modules]

    https://www.jstage.jst.go.jp/article/ieejjia/9/5/9_573/_pdf/-char/en

[Battery Module Equalizer]
Turmandakh Bat-Orgil, Bayasgalan Dugarjav, Toshihisa Shimizu, “Battery Module Equalizer based on State of Charge Observation derived from Overall Voltage Variation”, IEEJ J. Industry Applications, vol.9, no.5, pp.584–596, 2020.
[Keywords: battery management system, battery equalizer, Generation control circuit(GCC), state of charge (SOC)]

    https://www.jstage.jst.go.jp/article/ieejjia/9/5/9_584/_pdf/-char/en

[Three-Phase Four-Wire Distribution Feeders]
Yuya Kihara, Seita Hikosaka, Hiroaki Yamada, Toshihiko Tanaka, Fuka Ikeda, Masayuki Okamoto, Seong Ryong Lee, “Harmonics Compensation in Three-Phase Four-Wire Distribution Feeders With a Four-Leg Structured Active Power-Line Conditioner”, IEEJ J. Industry Applications, vol.9, no.5, pp.605–606, 2020.
[Keywords: three-phase four-wire distribution feeders, four-leg structured active power-line conditioner, harmonics compensation, constant dc-capacitor volatage-control]

    https://www.jstage.jst.go.jp/article/ieejjia/9/5/9_605/_pdf/-char/en

[Power Convention by Circuit Switching]
Tung-Hai Chin, “Establishment of Theory of Power Conversion by Circuit Switching”, IEEJ J. Industry Applications, vol.9, no.5, pp.607–617, 2020.
[Keywords: power electronics, power convention theory, DC-DC convention theory, electromagnetic energy]

    https://www.jstage.jst.go.jp/article/ieejjia/9/5/9_607/_pdf/-char/en

###########################################
[D7: Motion Control, Robotics, Sensing and their Applications]

[Disturbance Observer for Geared Two-Inertia System]
Shuang Xu, Minoru Yokoyama, Tomoyuki Shimono, “Back-drivability Improvement of Geared System Based on Disturbance Observer and Load-side Disturbance Observer”, IEEJ J. Industry Applications, vol.9, no.5, pp.475–485, 2020.
[Keywords: geared two-inertia system, back-drivability, disturbance observer, load-side disturbance observer]

    https://www.jstage.jst.go.jp/article/ieejjia/9/5/9_475/_pdf/-char/en

[Optimize Path Planning for Autonomous Construction Machine]
Kazuki Kuzu, Fuga Ohashi, Yutaka Uchimura, “Optimization of Grading Path Planning for an Autonomous Construction Machine”, IEEJ J. Industry Applications, vol.9, no.5, pp.497–504, 2020.
[Keywords: heavy construction equipment, genetic algorithm, optimal route search, simulation]

    https://www.jstage.jst.go.jp/article/ieejjia/9/5/9_497/_pdf/-char/en

[Estimation of Contact Position using Particle Filter ]
Kyo Kutsuzawa, Sho Sakaino, Toshiaki Tsuji, “Simultaneous Estimation of Contact Position and Tool Shape using an Unscented Particle Filter”, IEEJ J. Industry Applications, vol.9, no.5, pp.505–514, 2020.
[Keywords: intrinsic contact sensing, particle filter, contact position estimation, tool shape estimation]

    https://www.jstage.jst.go.jp/article/ieejjia/9/5/9_505/_pdf/-char/en

[Thermal Welding System based on EDM]
Issei Takeuchi, Masakazu Egawa, Satoshi Nishimura, Seiichiro Katsura, “Abstraction of Thermal Welding System based on Element-Description Method”, IEEJ J. Industry Applications, vol.9, no.5, pp.530–537, 2020.
[Keywords: element description method, heat flow control, temperature control, welding system]

    https://www.jstage.jst.go.jp/article/ieejjia/9/5/9_530/_pdf/-char/en

###########################################
[D8: Electric Machine, Motor Drive and their Applications]

[Alleviation Technique of Thermal Concentration]
Hideki Ayano, Ryohta Shimamoto, Takuma Noda, Takuma Horii, Yoshihiro Matsui, “Alleviation Technique for Thermal Concentration on Power Devices Driving a PMSM under Zero-Speed and High-Torque Condition”, IEEJ J. Industry Applications, vol.9, no.5, pp.563–572, 2020.
[Keywords: power device temperature, PMSM, thermal concentration, zero-sequence voltage, zero speed, three-level inverter]

    https://www.jstage.jst.go.jp/article/ieejjia/9/5/9_563/_pdf/-char/en

[Force Balance Control for Injection Molding Machine]
Yuki Matsui, Yuki Yokokura, Kiyoshi Ohishi, Daigo Hotta, Hiroshi Morita, “Quick Force Balance Control Based on Equilibrium Point Movement of Tie-bar Temperature Controllers for Injection Molding Machine”, IEEJ J. Industry Applications, vol.9, no.5, pp.597–604, 2020.
[Keywords: injection molding machine, non-linear, equilibrium point, thermal expansion, force control, mode conversion]

    https://www.jstage.jst.go.jp/article/ieejjia/9/5/9_597/_pdf/-char/en

[Engine Torque Control]
Yugo Tadano, Takashi Yamaguchi, Takao Akiyama, Masakatsu Nomura, “Engine Torque Simulated Vibration Control for Drive Train Bench System Using Generalized Periodic Disturbance Observer”, IEEJ J. Industry Applications, vol.9, no.5, pp.618–628, 2020.
[Keywords: generalized periodic observer, robust resonance suppression control, torque ripple suppression control, engine torque pulse simulation(ETPS)]

    https://www.jstage.jst.go.jp/article/ieejjia/9/5/9_618/_pdf/-char/en

################################################
#### Paper List: (Vol.6, No1 ~ Vol.9, No.4) ####
################################################

############################################
[D6: Power Electronics and Its Applications]

[Soft Switching Dual Boost Converter]
Mummadi Veerachary, Jyoti Prakash, “Zero-voltage Zero-current Switching Scheme for Charge-pump Based Dual Boost Converter”, IEEJ J. Industry Applications, vol.9, no.4, pp.366–375, 2020.
[Keywords: DC-DC converter, high voltage gain, PWM control, soft-switching]

    https://www.jstage.jst.go.jp/article/ieejjia/9/4/9_366/_pdf/-char/en

[Wireless Power Transfer]
Hirokazu Matsumoto, Teppei Zaitsu, Ryohei Noborikawa, Yojiro Shibako, Yasuhiko Neba, “Control for Maximizing Efficiency of Three-Phase Wireless Power Transfer Systems At Misalignments”, IEEJ J. Industry Applications, vol.9, no.4, pp.401–407, 2020.
[Keywords: imbalanced three-phase operation, sequential search, transfer efficiency, wireless power transfer system]

    https://www.jstage.jst.go.jp/article/ieejjia/9/4/9_401/_pdf/-char/en

[MPPT control]
Bingcheng Ji, Katsuhiro Hata, Takehiro Imura, Yoichi Hori, Shuhei Shimada, Osamu Kawasaki, “PV MPPT Control under Partial Shading Conditions with a Particle Replacement Gaussian Particle Swarm Optimization Method”, IEEJ J. Industry Applications, vol.9, no.4, pp.418–427, 2020.
[Keywords: Gaussian particle swarm optimization, global maximum power point tracking, partial shading conditions, particle replacement, photovoltanic, simulated annealing]

    https://www.jstage.jst.go.jp/article/ieejjia/9/4/9_418/_pdf/-char/en

[Matrix Converter]
Daiki Yutaka, Masato Koyama, Naoki Yamamura, Muneaki Ishida, “Proposal for Universal Direct Converter Based on Matrix Converter for Three-phase AC and DC Source”, IEEJ J. Industry Applications, vol.9, no.4, pp.428–434, 2020.
[Keywords: matrix converter, three-level inverter, direct converter, universal power convention]

    https://www.jstage.jst.go.jp/article/ieejjia/9/4/9_428/_pdf/-char/en

[MPPT control]
Bingcheng Ji, Katsuhiro Hata, Takehiro Imura, Yoichi Hori, Sayuri Honda, Shuhei Shimada, Osamu Kawasaki, “A Novel Particle Jump Particle Swarm Optimization Method for PV MPPT Control under Partial Shading Conditions”, IEEJ J. Industry Applications, vol.9, no.4, pp.435–443, 2020.
[Keywords: partical swarm optimization, global maximum power point tracking, particle jump, photovoltanic, simulated annealing]

    https://www.jstage.jst.go.jp/article/ieejjia/9/4/9_435/_pdf/-char/en

[Deadbeat Control of DC-DC Buck Converter]
Yoshiki Kosode, Hidemine Obara, Atsuo Kawamura, Yu Hosoyamada, Toyoaki Suenaga, Itsuo Yuzurihara, “High Performance Transient Response of High/Low Pulse Voltage using Two-Phase Interleaved DC-DC Buck Converter under Half Sampling Time Deadbeat Control”, IEEJ J. Industry Applications, vol.9, no.4, pp.444–452, 2020.
[Keywords: deatbeat control, dc-dc buck converter, fast response, two-phase interleave, High/Low pulse operation]

    https://www.jstage.jst.go.jp/article/ieejjia/9/4/9_444/_pdf/-char/en

[SiC applied Shinkansen]
Kenji Sato, Hirokazu Kato, Takafumi Fukushima, “Development of SiC Applied Traction System for Next-Generation Shinkansen High-Speed Trains”, IEEJ J. Industry Applications, vol.9, no.4, pp.453–459, 2020.
[Keywords: convention system, high-speed train, SiC, traction system]

    https://www.jstage.jst.go.jp/article/ieejjia/9/4/9_453/_pdf/-char/en

[Satellite Bus Voltage Controller]
Satoshi Ojika, Tomokazu Sakashita, Shinichiro Oikawa, “Transient Response Improvement and Reduced Heat Generation Control for Satellite Bus Voltage Controller”, IEEJ J. Industry Applications, vol.9, no.4, pp.468–474, 2020.
[Keywords: satellite, bus voltage controller, sequential shunt unit, interleave, heat distribution, digital control]

    https://www.jstage.jst.go.jp/article/ieejjia/9/4/9_468/_pdf/-char/en

[Space vector PWM of three level inverter]
Koroku Nishizawa, Jun-ichi Itoh, Akihiro Odaka, Akio Toba, Hidetoshi Umida, Input Current Harmonic Reduction based on Space Vector PWM for Three-level Inverter Operating over a Wide Range Power Factor, IEEJ Journal of Industry Applications, Volume 9, no. 3, pp. 208–218, 2020.
[Keywords: three-level voltage source inverter, space vector PWM, input current harmonics]

    https://www.jstage.jst.go.jp/article/ieejjia/9/3/9_208/_pdf/-char/en 

[Modular Multilevel converter]
Yunxiao Yang, Weiyao Wang, Ke Ma, Mission-Profile-Based Testing Scheme for Sub-Modules in Modular Multilevel Converter, IEEJ Journal of Industry Applications, Volume 9, no. 3, pp. 219–226, 2020.
[Keywords: mission profile emulator, modular Multilevel converter, sub-module, carrier phase-shift pulse width modulation]

    https://www.jstage.jst.go.jp/article/ieejjia/9/3/9_219/_pdf/-char/en

[Inductance design of active bridge converter]
Van-Long Pham, Keiji Wada, Normalization Design of Inductances in Triple Active Bridge Converter for Household Renewable Energy System, IEEJ Journal of Industry Applications, Volume 9, no. 3, pp. 227–234, 2020
[Keywords: triple active bridge converter, inductance design, normalization, household renewable energy system]

    https://www.jstage.jst.go.jp/article/ieejjia/9/3/9_227/_pdf/-char/en

[IGCT for resonant conversion]
Dragan Stamenkovic, Drazen Dujic, Application of the IGCT for Resonant Conversion with Low Switching Losses, IEEJ Journal of Industry Applications, Volume 9, no. 3, pp. 244–253, 2020.
[Keywords: IGCT, series resonant converter, LLC, DC-DC transformer, MVDC, solid state trasformer, high-power DC-DC]

    https://www.jstage.jst.go.jp/article/ieejjia/9/3/9_244/_pdf/-char/en 

[Filter design of micro-inverter]
Jie Ma, Changsheng Hu, Wenxing Zhong, Dehong Xu, An Optimization Design for Transformer and Output Filter of a Micro-inverter with Passive Integration Technique, IEEJ Journal of Industry Applications, Volume 9, no. 3, pp. 254–262, 2020.
[Keywords: power density, passive integration, transformer, output filter]

    https://www.jstage.jst.go.jp/article/ieejjia/9/3/9_254/_pdf/-char/en 

[Three-level buck converter]
Yoshitaka Yamauchi, Toru Sai, Takayasu Sakurai, Makoto Takamiya, Theoretical and Experimental Analyses of Dynamic Performance of Three-Level Buck Converters in Discontinuous Conduction Mode for Standby Mode Power Supply, IEEJ Journal of Industry Applications, Volume 9, no. 3, pp. 271–281, 2020.
[Keywords: three-level buck converter, discontinuous conduction mode, dynamic performance analysis]

    https://www.jstage.jst.go.jp/article/ieejjia/9/3/9_271/_pdf/-char/en 

[PWM for high-density power conversion]
Mahima Gupta, Giri Venkataramanan, Smart-Switching Pulse Width Modulation for High-Density Power Conversion, IEEJ Journal of Industry Applications, Volume 9, no. 3, pp. 282–290, 2020.
[Keywords: capacitors, control bandwidth, energy storage, pulse width modulation]

    https://www.jstage.jst.go.jp/article/ieejjia/9/3/9_282/_pdf/-char/en 

[Hybrid DCCB]
Kazuyasu Takimoto, Hiroshi Takenaka, Toshiaki Matsumoto, Takahiro Ishiguro, Experimental Verification of the Large-Current Turn-off of Series-Connected IEGTs for Hybrid DC Circuit Breakers, IEEJ Journal of Industry Applications, Volume 9, no. 3 , pp. 291–297, 2020.
[Keywords: HVDC, Hybrid DCCB, IEGT]

    https://www.jstage.jst.go.jp/article/ieejjia/9/3/9_291/_pdf/-char/en 

[Direct Electric Power Converter]
Kantaro Yoshimoto, Multiple-DC-Inputs Direct Electric Power Converter D-EPC Using Multiple Input Leg Reduction Topology and its Control, IEEJ Journal of Industry Applications, Volume 9, no. 3, pp. 298–304, 2020.
[Keywords: power conversion, power control, bi-directional switch, inverter, fuel cell vehicle, 3 level inverter]

    https://www.jstage.jst.go.jp/article/ieejjia/9/3/9_298/_pdf/-char/en 

[Power Module Inserter]
Junya Sato, Yoshiaki Ichikawa, Takayoshi Yamada, Kazuaki Ito, Hidehiko Yamamoto, Motoharu Fujihara, Satoshi Kawaguchi, Takehiko Suzuki, Jin Izawa, “Development of an Intelligent Power Module Inserter”, IEEJ J. Industry Applications, vol.9, no.2, pp.140–148, 2020.
[Keywords:intelligent power module (IPM), parallel link robot, visual feedback control, six-axis force sensor, peg-in-hole]

    https://www.jstage.jst.go.jp/article/ieejjia/9/2/9_140/_pdf/-char/en

[Iron Loss of Reactor Core]
Shuangshuang Zhong, Shunya Odawara, Nguyen Gia Minh Thao, Keisuke Fujisaki, Fujiyuki Iwamoto, Tomonori Kimura, Takahiro Yamada, “Numerical Analysis on Iron Loss of Reactor Core under Hysteresis B-H Curve Using Play Model for DC-DC Converter”, IEEJ J. Industry Applications,vol.9, no.2, pp.159–167, 2020.
[Keywords:DC-DC converter, play model, iron loss, minor loop, magnetic flux density ripples, current ripples]

    https://www.jstage.jst.go.jp/article/ieejjia/9/2/9_159/_pdf/-char/en

[Energy storage system]
Elosegui Garcia Pablo, Hitoshi Haga,”High-Efficiency Charge/Discharge Control of Hybrid Energy Storage System Based on High-Efficiency Voltage Range,”IEEJ J. Industry Applications, vol. 9, no. 1, pp43–50, 2020.
[Keywords: renewable energy, energy storage, high efficiency, battery, ultra-capacitor, storage control]

    https://www.jstage.jst.go.jp/article/ieejjia/9/1/9_43/_pdf/-char/ja

[Fault diagnosis of IGBT]
Nagendra Vara Prasad Kuraku, Yigang He, Murad Ali,”Fault Diagnosis of Open Circuit Multiple IGBT’s using PPCA-SVM in Single Phase Five-Level Voltage Controlled H-Bridge MLI,”IEEJ J. Industry Applications, vol. 9, no. 1, pp.61-72 , 2020.
[Keywords: fault diagnosis, voltage controlled CHMI, PPCA, SVM]

    https://www.jstage.jst.go.jp/article/ieejjia/9/1/9_61/_pdf/-char/ja

[Partial shading detection of PV system]
Masamichi Tanemo, Koki Matsudate, Shinichi Nomura,”Change in Circuit Configuration of Photovoltaic Modules Using Series/Parallel Switching Circuits Composed of Power MOSFETs,”IEEJ J. Industry Applications, vol. 9, no. 1, pp.73-81, 2020.
[Keywords: partial shading detection, photovoltaic power system, power MOSFET, series/parallel switching control]

    https://www.jstage.jst.go.jp/article/ieejjia/9/1/9_73/_pdf/-char/ja

[HVDC]
Andreas Jehle, J?rgen Biela,”Comprehensive Design Procedure and Control of a Hybrid Circuit Breaker with Adaptable Pulse Current Injection,”IEEJ J. Industry Applications, vol. 9, no. 1, pp.82–91, 2020.
[Keywords: HVDC transmission, circuit breakers, fault currents]

    https://www.jstage.jst.go.jp/article/ieejjia/9/1/9_82/_pdf/-char/ja

[DC-electrified railway system]
Hiroyasu Kobayashi, Natsuki Kawagoe, Keiichiro Kondo, Tetsuya Iwasaki, Akihiro Tsumura,”Method to Design Control System of Traction Inverter of DC-electrified Railway Vehicle for an Increase in Regenerative Brake Power,”IEEJ J. Industry Applications, vol. 9, no. 1, pp.92–101, 2020.
[Keywords: DC-electrified railway system, regenerative power, light-load regenerative brake control, pole assignment, single pulse vector control]

    https://www.jstage.jst.go.jp/article/ieejjia/9/1/9_92/_pdf/-char/ja

[Grid-conneted converter]
C.T. Lee, A. Kikuchi, and T. Ito,”An Auto-Tuning Damper for the Harmonic Resonance of Grid-Connected Converters,”IEEJ J. Industry Applications, vol. 8, no. 6, pp. 884–892, 2019.
[Keywords: power converter, system impedance variations, on-line detection, harmonics, resonances suppression, damping control]

    https://www.jstage.jst.go.jp/article/ieejjia/8/6/8_884/_pdf“

[Railway power management]
W. Kampeerawat, and T. Koseki,”Integrated Design of Smart Train Scheduling, Use of Onboard Energy Storage, and Traction Power Management for Energy-Saving Urban Railway Operation,”IEEJ J. Industry Applications, vol. 8, no. 6, pp. 893–903, 2019.
[Keywords: onboard energy storage, railway power management, regenerative power, train scheduling]

    https://www.jstage.jst.go.jp/article/ieejjia/8/6/8_893/_pdf“

[PWM inverter control]
K. Nishizawa, J. Itoh, A. Odaka, A. Toba, and H. Umida,”Microcomputer-based Discontinuous PWM for DC-link Current Harmonic Reduction in Three-phase VSIs,”I
EEJ J. Industry Applications, vol. 8, no. 6, pp. 904–914, 2019.
[Keywords: two-level voltage source inverter, discontinuous PWM, DC-link capacitors, DC-link current harmonics]

    https://www.jstage.jst.go.jp/article/ieejjia/8/6/8_904/_pdf“

[Railway power management]
W. Kampeerawat, and T. Koseki,”Efficient Urban Railway Design Integrating Train Scheduling, Wayside Energy Storage, and Traction Power Management,”IEEJ J. Industry Applications, vol. 8, no. 6, pp. 915–925, 2019.
[Keywords: wayside energy storage, railway power management, regenerative power, train scheduling]

    https://www.jstage.jst.go.jp/article/ieejjia/8/6/8_915/_pdf“

[Dual inverter drive]
Y. Oto, and T. Noguchi,”Fault-Tolerant Function of DC-Bus Power Source in A Dual Inverter Drive System and Its Operation Characteristics,”IEEJ J. Industry Applications, vol. 8, no. 6, pp. 953–959, 2019.
[Keywords: fault-tolerant function, dual inverter drive system, open-end winding motor, capacitor voltage control, space vector modulation]

    https://www.jstage.jst.go.jp/article/ieejjia/8/6/8_953/_pdf“

[PFC design]
J. Wyss, and J. Biela,”Optimal Design of Bidirectional PFC Rectifiers and Inverters Considering 2L and 3L Topologies with Si, SiC, and GaN Switches,”IEEJ J. Industry Applications, vol. 8, no. 6, pp. 975–983, 2019.
[Keywords: three-phase system, modulation strategy, power factor correction, EMC/EMI]

    https://www.jstage.jst.go.jp/article/ieejjia/8/6/8_975/_pdf“

[Boost converter]
W. Martinez, C. Cortes, and J. Imaoka,”Coupled Inductor Optimization of a High Step-up Interleaved Boost Converter,”IEEJ J. Industry Applications, vol. 8, no. 6, pp. 984–990, 2019.
[Keywords: multi objective optimization, high step-up converter, voltage gain, efficiency, power density]

    https://www.jstage.jst.go.jp/article/ieejjia/8/6/8_984/_pdf“

[PWM control]
S. Furutani, and A. Satake,”Output Voltage Accuracy Improvement Method for Inverter to which Asynchronous PWM Applied,”
IEEJ J. Industry Applications, vol. 8, no. 6, pp. 997–1006, 2019.
[Keywords: asynchronous PWM, inverter, voltage, accuracy, control]

    https://www.jstage.jst.go.jp/article/ieejjia/8/6/8_997/_pdf“

[Circuit Topology]
Hamdy Radwan, Mahmoud A. Sayed, Takaharu Takeshita, Adel A. Elbaset, G. Shabib,”Boost Inverter Topology with High-Frequency Link Transformer for PV Grid-Tied Applications,”IEEJ J. Industry Applications, vol. 8, no. 5, pp. 849-856, 2019.   
[Keywords: photovoltaic, grid connected, boost inverter, high frequency transformer]     

    https://www.jstage.jst.go.jp/article/ieejjia/8/5/8_849/_pdf

[Circuit Topology]
Yukinori Tsuruta, Atsuo Kawamura,”Realization and Highly Precise Measurement of 50kW HEECS Chopper with 99.5% Efficiency,”IEEJ J. Industry Applications, vol. 8, no. 5, pp. 843-848, 2019.     
[Keywords: partial boost method, dual active bridge converter, SiC-MOSFET, back to back system] 

    https://www.jstage.jst.go.jp/article/ieejjia/8/5/8_843/_pdf

[Control]
Yoko Takeuchi, Tomoyuki Ogawa, Keisuke Sato, Hiroaki Morimoto, Tatsuhito Saito,”Power Control Optimization of an Energy Storage System in DC Electric Railways,”IEEJ J. Industry Applications, vol. 8, no. 5, pp. 827-834, 2019.       
[Keywords: DC feeding system, electric railway network, regenerative energy, mixed integer programming] 

    https://www.jstage.jst.go.jp/article/ieejjia/8/5/8_827/_pdf

[Control]
Toshiomi Oka, Shigeki Nakano, Seiya Abe, Satoshi Matsumoto,”Novel Fully Digital-Controlled Point of Load Converter Based on H-bridge DC-DC Converter,”IEEJ J. Industry Applications, vol. 8, no. 5, pp. 813-819, 2019. 
[Keywords: H-bridge, DC-DC converter, programmable power supply, FPGA, sudden load change, parallel connection control] 

    https://www.jstage.jst.go.jp/article/ieejjia/8/5/8_813/_pdf

[Control]
Jun-ichi Itoh, Kazuki Aoyagi, Keisuke Kusaka, Masakazu Adachi,”Development of Solid-state Transformer for 6.6-kV Single-phase Grid with Automatically Balanced Capacitor Voltage,”IEEJ J. Industry Applications, vol. 8, no. 5, pp. 795-802, 2019.     
[Keywords: solid-state transformer, power factor correction converter, resonant DC-DC converter, high-frequency transformer]     

    https://www.jstage.jst.go.jp/article/ieejjia/8/5/8_795/_pdf

[Control]
Ayataro Tamura, Takayuki Ishibashi, Takuro Umihara, Yukinori Tsuruta, Hidemine Obara, Atsuo Kawamura,”Voltage Control of Intermittent Pulse Density Modulation for Two Battery-operated HEECS Choppers and its Application for Range Extension of Electric Vehicles,”IEEJ J. Industry Applications, vol. 8, no. 5, pp. 787-794, 2019.   
[Keywords: voltage control, electric vehicle, power train, buck chopper, motor test bench, power electronics]   

    https://www.jstage.jst.go.jp/article/ieejjia/8/5/8_787/_pdf

[DC breaker]
Yushi Koyama, Ryuta Hasegawa, Kazuhisa Kanaya, Toshiaki Matsumoto, Takahiro Ishiguro,”Operation and Experimentation of a Current Commutated Hybrid DC Circuit Breaker for HVDC Transmission Grids,”IEEJ J. Industry Applications, vol. 8, no. 5, pp. 835-842, 2019.     
[Keywords: current commutation, HVDC, Hybrid DCCB, semiconductor]       

    https://www.jstage.jst.go.jp/article/ieejjia/8/5/8_835/_pdf

[Induction Heating]
Takuya Shijo, Yuki Uchino, Yujiro Noda, Hiroaki Yamada, Toshihiko Tanaka,”New Induction Heating Coils with Reduced Iron-Loss in the Cores for Small-Foreign-Metal Particle Detector Using an SiC-MOSFETs High-Frequency Inverter,”IEEJ J. Industry Applications, vol. 8, no. 5, pp. 802-812, 2019.     
[Keywords: SiC-MOSFETs, small-foreign-metal particle detector, induction heating, iron loss reduction]   

    https://www.jstage.jst.go.jp/article/ieejjia/8/5/8_803/_pdf

[Transformer]
Naoyuki Kurita, Tomoyuki Hatakeyama, Mamoru Kimura, Kenji Nakamura, Osamu Ichinokura, 500kVA Medium-Frequency Core-Type Amorphous Transformers with Alternately Wound Sheet Winding for Offshore DC Grid, IEEJ J. Industry Applications, vol. 8, no. 5, pp. 756-766, 2019.     
[Keywords: offshore wind farm, multi-winding, proximity effect, lap-joint amorphous core, leakage flux, winding loss]   

    https://www.jstage.jst.go.jp/article/ieejjia/8/5/8_756/_pdf

[AC-AC]
Shunsuke Takuma and Jun-ichi Itoh, “Two-step Commutation for Three-phase-to-single-phase Matrix Converter with High-frequency Isolation,” IEEJ J. Industry Applications, vol. 8, no. 4, pp. 704–712, 2019.     
[Keywords:two-step commutation, current direction estimation, commutation failure]       

    https://www.jstage.jst.go.jp/article/ieejjia/8/4/8_704/_pdf

[AC-AC]
Kichiro Yamamoto, Sho Ehira, and Minoru Ikeda”Synchronous Frame Control for Voltage Sag/Swell Compensator Utilizing Single-Phase Matrix Converter,”IEEJ J. Industry Applications, vol. 6, no. 6, pp. 353-361, 2017.     
[Keywords: single-phase matrix converter, voltage sag/swell compensator]         

    https://www.jstage.jst.go.jp/article/ieejjia/6/6/6_353/_pdf

[AC-DC]
Prathamesh Pravin Deshpande, Amit Kumar Singh, Hau Chong Aih, and Sanjib Kumar Panda, “A Matrix-based Isolated Bidirectional AC-DC Converter with LCL type Input Filter for Energy Storage Applications,” IEEJ J. Industry Applications, vol. 8, no. 4, pp. 644–651, 2019.     
[Keywords: matrix, bidirectional, SVM, AC-AC, AC-DC, isolation] 

    https://www.jstage.jst.go.jp/article/ieejjia/8/4/8_644/_pdf

[AC-DC]
Yusuke Hayashi and Tamotsu Ninomiya”Highly Scalable Sensorless Multicellular AC-DC Transformer (ADX) for the DC Distribution System in Data Centers,”IEEJ J. Industry Applications, vol. 7, no. 6, pp.  479-487, 2018. 
[Keywords: ac-dc transformer (ADX), multicellular converter topology, ISOP (input series output parallel), IPOS (input parallel output series)] 

    https://www.jstage.jst.go.jp/article/ieejjia/7/6/7_479/_pdf

[Converter]
Philipp Pasolli, and Michael Ruderman”Design, Control, and Analysis of Nonlinear Circuits with Tunnel Diode with Piecewise Affine Dynamics,”IEEJ J. Industry Applications, vol. 8, no. 2, pp. 240-249, 2019.   
[Keywords: tunnel diode, nonlinearity, electric circuits, hybrid control, limit cycle, piecewise affine systems, formal verification]   

    https://www.jstage.jst.go.jp/article/ieejjia/8/2/8_240/_pdf

[DC-DC]
Xianjin Huang, Juan Zhao, Fenglu Li, and Fei Lin, “Loss Characteristics of Input-Series Output-Parallel SiC DC-DC Converter Used in Auxiliary Power Systems,” IEEJ J. Industry Applications, vol. 8, no. 4, pp. 677–684, 2019.
[Keywords: ISOP PSFB converter, loss characteristics, SiC MOSFET]       

    https://www.jstage.jst.go.jp/article/ieejjia/8/4/8_677/_pdf

[DC-DC]
Mizuki Nakahara, Yuki Kawaguchi, Kimihisa Furukawa, Mitsuhiro Kadota, Yuichi Mabuchi, and Akihiko Kanoda, “Development of a Control Method for LLC Converter Utilized for Input-Parallel-Output-Series Inverter System with Solid-State Transformers,” IEEJ J. Industry Applications, vol. 8, no. 4, pp. 652–659, 2019.       
[Keywords:solid-state transformer, multi-level, LLC converter, SiC, efficiency, PCS]     

    https://www.jstage.jst.go.jp/article/ieejjia/8/4/8_652/_pdf

[DC-DC]
Hisahiro Yamanaka and Hiroaki Yamada”Dual Active Bridge DC-DC Converter based Wide Dimming Range LED Driver With High-Speed Turn-Off for High-Brightness LED Floodlight,”IEEJ J. Industry Applications, vol. 8, no. 3, pp. 556-557, 2019.       
[Keywords: dual active bridge converter, LED floodlight, LED driver]     

    https://www.jstage.jst.go.jp/article/ieejjia/8/3/8_556/_pdf

[DC-DC]
Georges Engelmann, Alexander Sewergin, Markus Neubert, and Rik W. De Doncker”Design Challenges of SiC Devices for Low- and Medium-Voltage DC-DC Converters,”IEEJ J. Industry Applications, vol. 8, no. 3, pp. 505-511, 2019.   
[Keywords: silicon carbide, MOSFETs, converters, switching transients]   

    https://www.jstage.jst.go.jp/article/ieejjia/8/3/8_505/_pdf

[DC-DC]
Seiji Iyasu, Yuji Hayashi, Yuichi Handa, Kimikazu Nakamura, and Keiji Wada”A Bidirectional Current Sensor based on CT with Diode Rectifier and MOSFET for Bidirectional Current-fed DC-DC Converter,”IEEJ J. Industry Applications, vol. 8, no. 3, pp. 437-443, 2019.   
[Keywords: bidirectional DC-DC converter, bidirectional current sensor, current transformer]     

    https://www.jstage.jst.go.jp/article/ieejjia/8/3/8_437/_pdf

[DC-DC]
Muhammad Hazarul Azmeer bin Ab Malek, Hiroaki Kakigano, and Kiyotsugu Takaba”Dual Active Bridge DC-DC Converter with Tunable Dual Pulse-Width Modulation for Complete Zero Voltage Switching Operation,”IEEJ J. Industry Applications, vol. 8, no. 1, pp. 98-107, 2019.
[Keywords: dual active bridge, zero voltage switching, modulation strategy, pulse-width modulation]     

    https://www.jstage.jst.go.jp/article/ieejjia/8/1/8_98/_pdf

[DC-DC]
Koya Nishimoto, Yuichi Kado, and Keiji Wada “Implementation of Decoupling Power Flow Control System in Triple Active Bridge Converter Rated at 400V, 10kW, and 20kHz,”IEEJ J. Industry Applications, vol. 7, no. 5, pp. 410-415, 2018. 
[Keywords:three-way power router, triple active bridge converter, phase shift modulation, decoupling control, power ?ow control, autonomous microgrid system]   

    https://www.jstage.jst.go.jp/article/ieejjia/7/5/7_410/_pdf

[DC-DC]
Hiroshi Nakao, Yu Yonezawa, Takahiko Sugawara, Yoshiyasu Nakashima, and Fujio Kurokawa “Online Degradation Detection/Prediction Method for Current Transfer Ratio of Photo-Coupler Installed in Digitally-Controlled Switching Mode Power Supply,”IEEJ J. Industry Applications, vol. 7, no. 5, pp. 403-409, 2018.     
[Keywords:photo-coupler, current transfer ratio, CTR, degradation, failure prediction, digitally-controlledpower supply]         

    https://www.jstage.jst.go.jp/article/ieejjia/7/5/7_403/_pdf

[DC-DC]
Mai Uenaka, Yuya Tanaka, and Akinu Nakabayashi “Design Approach of Non-Isolated Converters with Passive Soft Switching,”IEEJ J. Industry Applications, vol. 7, no. 4, pp. 371-377, 2018.       
[Keywords: non-isolated DC/DC, soft switching, DC/DC converter, high-frequency switching]       

    https://www.jstage.jst.go.jp/article/ieejjia/7/4/7_371/_pdf

[DC-DC]
Yue Yu, Keisuke Masumoto, Keiji Wada, Yuichi Kado”A DC Power Distribution System in a Data Center using a Triple Active Bridge DC-DC Converter”IEEJ J.Industry Applications, vol. 7,no .3, pp. 202-209, 2018.   
[Keywords: data center, DC power distribution, GaN power device, triple active bridge converter, phase shift control]   

    https://www.jstage.jst.go.jp/article/ieejjia/7/3/7_202/_pdf

[DC-DC]
Muhammad Hazarul Azmeer bin Ab Malek, Hiroaki Kakigano, and Kiyotsugu Takaba”Combined Pulse-Width Modulation of Dual Active Bridge DC-DC Converter to Increase the Efficiency of Bidirectional Power Transfer,”IEEJ J. Industry Applications, vol. 7, no. 2, pp. 166-174, 2018.
[Keywords: dual active bridge, bidirectional power transfer, modulation strategy, soft-switching range, pulse-width modulation] 

    https://www.jstage.jst.go.jp/article/ieejjia/7/2/7_166/_pdf

[DC-DC]
Toru Tanaka, Yoshinori Takahashi, Kenji Natori, and Yukihiko Sato”High-Efficiency Floating Bidirectional Power Flow Controller for Next-Generation DC Power Network,” IEEJ J. Industry Applications, vol. 7, no. 1, pp. 29-34, 2018.   
[Keywords: DC power network, bidirectional buck-boost converter, bidirectional power flow controller (BPFC), floating bidirectional power flow controller (F-BPFC)]     

    https://www.jstage.jst.go.jp/article/ieejjia/7/1/7_29/_pdf

[DC-DC]
Shota Kimura, Kimihiro Nanamori, Taichi Kawakami, Jun Imaoka, and Masayoshi Yamamoto”Allowable Power Analysis and Comparison of High Power Density DC-DC Converters with Integrated Magnetic Components,”IEEJ J. Industry Applications, vol. 6, no. 6, pp. 463-472, 2017.       
[Keywords: interleaved dc-dc converter, high power density, loosely-coupled inductors, closed-coupled inductors, integratedwinding-coupled inductors, allowable power]   

    https://www.jstage.jst.go.jp/article/ieejjia/6/6/6_463/_pdf

[DC-DC]
Zhang Haifeng, and Wang Peng”Design of an LCC Resonant Converter for Furnace Power Supply during Electron Bean Melting,”IEEJ J. Industry Applications, vol. 6, no. 6, pp. 387-394, 2017.       
[Keywords: electron beam melting furnace, high voltage DC power supply, LCC series and parallel resonant converter, softswitching technology]   

    https://www.jstage.jst.go.jp/article/ieejjia/6/6/6_387/_pdf

[DC-DC]
Aviti Mushi, Sakahisa Nagai, Hidemine Obara, and Atsuo Kawamura, “Fast and Robust Nonlinear Deadbeat Current Control for Boost Converter,”IEEJ J. Industry Applications, vol. 6, no. 5, pp. 311-319, 2017.     
[Keywords: boost converter, digital control, deadbeat control, disturbance observer, settling time, recovery time]       

    https://www.jstage.jst.go.jp/article/ieejjia/6/5/6_311/_pdf

[DC-DC]
Yusuke Hayashi, Yoshikatsu Matsugaki, and Tamotsu Ninomiya, “Capacitively Isolated Multicell Dc-Dc Transformer for Future Dc Distribution System,”IEEJ J. Industry Applications, vol. 6, no. 4, pp. 268-277, 2017.     
[Keywords: dc-dc transformer (dcx), capacitive isolation, multicell topology, ISOP (input series output parallel), IPOS (input parallel output series)] 

    https://www.jstage.jst.go.jp/article/ieejjia/6/4/6_268/_pdf

[DC-DC]
Duy-Dinh Nguyen, Duc Tuyen Nguyen, and Goro Fujita,”New Modulation Strategy Combining Phase Shift and Frequency Variation for Dual-Active-Bridge Converter”,IEEJ J. Industry Applications, vol.6, no.2, pp.140-150, 2017.       
[Keywords: dual-active-bridge converter, bidirectional converter, ZVS, single phase shift, frequency variation] 

    https://www.jstage.jst.go.jp/article/ieejjia/6/2/6_140/_pdf

[Drive]
Lazhar Ben-Brahim, Adel Gastli, Teruo Yoshino, Tomoki Yokoyama, and Atsuo Kawamura”Review of Medium Voltage High Power Electric Drives,”IEEJ J. Industry Applications, vol. 8, no. 1, pp. 1-11, 2019.   
[Keywords: medium voltage electric drives, variable frequency drives, multilevel inverters]     

    https://www.jstage.jst.go.jp/article/ieejjia/8/1/8_1/_pdf

[EMC]
Kazuhiro Shirakawa, Kazuyoshi Obayashi, Hiroshi Taki, Masami Fujitsuna, and Toshihisa Shimizu”Z-matched Active Common-mode Canceller for the Suppression of Common-mode Current in an Inverter System,”IEEJ J. Industry Applications, vol. 8, no. 1, pp. 142-151, 2019.         
[Keywords: active common-mode canceller, suppression of common-mode current]     

    https://www.jstage.jst.go.jp/article/ieejjia/8/1/8_142/_pdf

[EMI]
Ryo Shirai, and Toshihisa Shimizu, “Time Domain Analysis of Transmission Failure on CAN System due to Differential-Mode Noise Emitted from a Buck Converter,” IEEJ J. Industry Applications, vol. 8, no. 4, pp. 608–614, 2019.
[Keywords: buck converter, CAN, electromagnetic noise, EMI, spread-spectrum technique]   

    https://www.jstage.jst.go.jp/article/ieejjia/8/4/8_608/_pdf

[EV]
Minella Bezha and Naoto Nagaoka”Improved ANN for Estimation of Power Consumption of EV for Real-Time Battery Diagnosis,”IEEJ J. Industry Applications, vol. 8, no. 3, pp. 532-538, 2019.       
[Keywords: ANN, electric vehicle (EV), lithium-ion battery (Li-Ion), state of charge (SOC) estimation, fast adaptive estimation]         

    https://www.jstage.jst.go.jp/article/ieejjia/8/3/8_532/_pdf

[EV]
Kyungmin Sung, Taisei Nishino, and Motohiro Takayasu”A Power-Assistance System using a Battery and an Electric Double-Layer Capacitor Bank for Light Electric Vehicles,”IEEJ J. Industry Applications, vol. 8, no. 3, pp. 465-470, 2019.       
[Keywords: light electric vehicles, hybrid energy storage system, electric double-layer capacitor]       

    https://www.jstage.jst.go.jp/article/ieejjia/8/3/8_465/_pdf

[EV]
Van-Duc Doan, Hiroshi Fujimoto, Takafumi Koseki, Tomio Yasuda, Hiroyuki Kishi, and Toshiyuki Fujita”Iterative Dynamic Programming for Optimal Control Problem with Isoperimetric Constraint and Its Application to Optimal Eco-driving Control of Electric Vehicle,”IEEJ J. Industry Applications, vol. 7, no. 1, pp. 80-92, 2018.     
[Keywords: dynamic programming, iterative dynamic programming, optimal control problem, isoperimetric constraint, electric vehicle, eco-driving]         

    https://www.jstage.jst.go.jp/article/ieejjia/7/1/7_80/_pdf

[Gate Drive]
Koji Orikawa, Takeshi Kinomae, and Jun-ichi Itoh”Experimental Verification of Self-Supplying Power Circuit using One-Turn Transformer for Gate Drive Unit,”IEEJ J. Industry Applications, vol. 8, no. 1, pp. 12-22, 2019.       
[Keywords: self-supplying power circuit, gate drive unit, one-turn transformer] 

    https://www.jstage.jst.go.jp/article/ieejjia/8/1/8_12/_pdf

[Gate Drive]
Koji Yamaguchi, Kenshiro Katsura, Tatsuro Yamada, Yukihiko Sato”Comprehensive Study on Gate Driver for SiC-MOSFETs with Gate Boost”IEEJ J.Industry Applications, vol. 7,no .3, pp. 218-228, 2018.       
[Keywords: gate drive, EMI, inverter, SiC, MOSFET, switching loss, switching noise]     

    https://www.jstage.jst.go.jp/article/ieejjia/7/3/7_218/_pdf/

[Gate Drive]
Hiroshi Shinoda, and Takahide Terada, “Insulated Signal Transmission System with Near-field Resonant Coupler to Drive High-voltage Power Devices”,IEEJ J. Industry Applications, vol.6, no.3, pp. 205-212, 2017.       
[Keywords: resonant coupling, near-field, parasitic capacitance, gate driver, PCB, IGBT]         

    https://www.jstage.jst.go.jp/article/ieejjia/6/3/6_205/_pdf

[Home Appliance]
Kenji Yamamoto, Richard Lum, and Hisashi Takahashi”A Completely Capacitor-less, LED-switching Offline Lighting System,”IEEJ J. Industry Applications, vol. 8, no. 2, pp. 379-385, 2019.         
[Keywords:light emitting diode, LED, LED lighting, offline LED driver, LED switching, electrolytic capacitor-less]       

    https://www.jstage.jst.go.jp/article/ieejjia/8/2/8_379/_pdf

[Inverter]
Koji Yamaguchi, Kenshiro Katsura, Tatsuro Yamada, and Yukihiko Sato, “High Power Density SiC-Based Inverter with a Power Density of 70 kW/liter or 50 kW/kg,” IEEJ J. Industry Applications, vol. 8, no. 4, pp. 694–703, 2019.
[Keywords:SiC, gate drive, MOSFET, high power density, inverter]         

    https://www.jstage.jst.go.jp/article/ieejjia/8/4/8_694/_pdf

[Inverter]
Hiroaki Ueta, and Tomoki Yokoyama, “Experimental Verification of Deadbeat Control with 1-MHz Multisampling and Disturbance Compensation Method for Three Phase PWM Inverter,” IEEJ J. Industry Applications, vol. 8, no. 4, pp. 632–637, 2019.
[Keywords:FPGA, three phase PWM inverter, deadbeat control, UPS]         

    https://www.jstage.jst.go.jp/article/ieejjia/8/4/8_632/_pdf

[Inverter]
Tetsuji Daido and Yoichi Hayashi”Output Voltage Error Compensation for Every Half of a Carrier Period in a Voltage Source Inverter,”IEEJ J. Industry Applications, vol. 8, no. 1, pp. 41-50, 2019.     
[Keywords: output voltage error compensation, instantaneous current prediction, dead time, voltage source inverter]     

    https://www.jstage.jst.go.jp/article/ieejjia/8/1/8_41/_pdf

[Inverter]
Mohammad Bani Shamseh, Teruo Yoshino, and Atsuo Kawamura, “Load Current Distribution between Parallel Inverters based on Capacitor Voltage Control for UPS Applications,”IEEJ J. Industry Applications, vol. 6, no. 4, pp. 258-267, 2017.       
[Keywords: current sharing, UPS, parallel inverters, multi-loop control, active damping]         

    https://www.jstage.jst.go.jp/article/ieejjia/6/4/6_258/_pdf

[Low-Power Converter]
Tomio Sato, Masahide Marumo, and Tetsuya Akitsu, “Lamb-Wave Resonator Oscillator Powered by Inductive Compensation of Stray-Capacitance CMOS Inverter”,IEEJ J. Industry Applications, vol.6, no.3, pp.213-222, 2017.   
[Keywords: fT , SAW, Lamb-wave oscillator]       

    https://www.jstage.jst.go.jp/article/ieejjia/6/3/6_213/_pdf

[Multilevel Topology]
Sjef J. Settels, Jorge L. Duarte, and Jeroen van Duivenbode”Flying Capacitor Resonant Pole Inverter with Direct Inductor Current Feedback,”IEEJ J. Industry Applications, vol. 8, no. 3, pp. 444-451, 2019.     
[Keywords: current control, multilevel converters, resonant inverters, zero voltage switching]   

    https://www.jstage.jst.go.jp/article/ieejjia/8/3/8_444/_pdf

[Multilevel Topology]
Jakub Kucka, and Axel Mertens”Common-Mode Voltage Injection Techniques for Quasi-Two-Level PWM-Operated Modular Multilevel Converters,”IEEJ J. Industry Applications, vol. 8, no. 2, pp. 287-294, 2019.
[Keywords: modular multilevel converter, quasi-two-level, PWM, capacitance reduction]   

    https://www.jstage.jst.go.jp/article/ieejjia/8/2/8_287/_pdf

[Multilevel Topology]
Tomoya Sugimoto, Takahiro Nozaki, and Toshiyuki Murakami”Multilevel Inverter Topology Using Current Path Change for Zero Current Switching,”IEEJ J. Industry Applications, vol. 8, no. 2, pp. 250-255, 2019.   
[Keywords: multilevel inverter, switching loss, bidirectional switch, topology, zero current switching] 

    https://www.jstage.jst.go.jp/article/ieejjia/8/2/8_250/_pdf

[Multilevel Topology]
Toshiki Nakanishi, and Jun-ichi Itoh, “Design Guidelines of Circuit Parameters for Modular Multilevel Converter with H-bridge Cell”,IEEJ J. Industry Applications, vol.6, no.3, pp.231-244, 2017.       
[Keywords: modular multilevel converter, high power density design, H-bridge cell, step-down rectifier] 

    https://www.jstage.jst.go.jp/article/ieejjia/6/3/6_231/_pdf

[Multilevel Topology]
Toshiki Nakanishi, and Jun-ichi Itoh,”Control Strategy for Modular Multilevel Converter based on Single-phase Power Factor Correction Converter”,IEEJ J. Industry Applications, vol.6, no.1, pp.46-57, 2017.   
[Keywords: modular multilevel converter, power factor correction converter, step-down rectifier, DC micro-grid, DC distribution systems]         

    https://www.jstage.jst.go.jp/article/ieejjia/6/1/6_46/_pdf

[Other topics]
Takashi Ando, and Tomoki Yokoyama, “Experimental Verification of Robot Hand Operation using The Power Packet Dispatching System,” IEEJ J. Industry Applications, vol. 8, no. 4, pp. 638–643, 2019.     
[Keywords: FPGA, power packet, robot arm, robot hand, routing]   

    https://www.jstage.jst.go.jp/article/ieejjia/8/4/8_638/_pdf

[Other topics]
Yoshifumi Aoki, Hiromichi Ito, Chuzo Ninagawa, Junji Morikawa, Takashi Inaba, and Seiji Kondo”Complex Coordination Control with Entire Power Limitation and Partial Temperature Priority of Building-Multi Air-conditioning Facilities for Real-Time Pricing,”IEEJ J. Industry Applications, vol. 8, no. 3, pp. 566-575, 2019. 
[Keywords: real-time pricing, multi-unit-type building air-conditioner, simulated annealing]     

    https://www.jstage.jst.go.jp/article/ieejjia/8/3/8_566/_pdf

[Other topics]
Stefan Rietmann, Simon Fuchs, Andr? Hillers, and J?rgen Biela”Field Bus for Data Exchange and Control of Modular Power Electronic Systems with High Synchronisation Accuracy of ± 4 ns,”IEEJ J. Industry Applications, vol. 8, no. 2, pp. 295-305, 2019.       
[Keywords: communication protocol, field bus, synchronisation, modular power electronic systems]         

   https://www.jstage.jst.go.jp/article/ieejjia/8/2/8_295/_pdf

[Passive Component]
Milos Stojadinovic, and Jurgen Biela, “Modeling and Design of a Medium-Frequency Transformer for High-Power DC-DC Converters,” IEEJ J. Industry Applications, vol. 8, no. 4, pp. 685–693, 2019.       
[Keywords:medium-frequency transformer, modeling, optimization, isolated DC-DC converter, battery storage]       

    https://www.jstage.jst.go.jp/article/ieejjia/8/4/8_685/_pdf

[Passive Component]
Pin-Yu Huang, and Toshihisa Shimizu, “High Power/Current Inductor Loss Measurement with Improved Shunt Resistor Construction,” IEEJ J. Industry Applications, vol. 8, no. 4, pp. 669–676, 2019.       
[Keywords:ISOP PSFB converter, loss characteristics, SiC MOSFET]         

    https://www.jstage.jst.go.jp/article/ieejjia/8/4/8_669/_pdf

[Passive Component]
Hideki Ayano, Akira Fujimura, and Yoshihiro Matsui, “Improvement of High-Frequency Characteristics of Small-Size Toroidal Reactors with New Wire Guides,” IEEJ J. Industry Applications, vol. 8, no. 4, pp. 615–622, 2019.     
[Keywords:reactor, parasitic capacitance, high frequency, wire guide]   

    https://www.jstage.jst.go.jp/article/ieejjia/8/4/8_615/_pdf

[Passive Component]
Kazunori Hasegawa, Shin-ichi Nishizawa, and Ichiro Omura”A Condition-Monitoring Method of DC-Link Capacitors Used in a High-Power Three-Phase PWM Inverter with an Evaluation Circuit,”IEEJ J. Industry Applications, vol. 8, no. 3, pp. 480-487, 2019.
[Keywords: DC-link capacitors, three-phase inverters, condition monitoring, equivalent series resistance, capacitance]   

    https://www.jstage.jst.go.jp/article/ieejjia/8/3/8_480/_pdf

[Passive Component]
Yuki Ishikura, Jun Imaoka, Mostafa Noah, and Masayoshi Yamamoto”Comparative Evaluation of Electrical and Calorimetric Methods to Estimate Core Loss in Powder Cores,”IEEJ J. Industry Applications, vol. 8, no. 3, pp. 386-393, 2019.   
[Keywords: powder core, core loss, electrical methods, calorimetric methods, relative permeability]     

    https://www.jstage.jst.go.jp/article/ieejjia/8/3/8_386/_pdf

[Passive Component]
Hiroaki Sato, Yoshihiro Miwa, Toshihisa Shimizu, and Kinji Kanagawa”Iron-loss Calculation of Inductors Considering Non-uniform Flux Density Conditions,”IEEJ J. Industry Applications, vol. 8, no. 2, pp. 359-369, 2019.       
[Keywords: iron loss, DC pre-magnetization, inductor, air gap, electromagnetic simulation]       

    https://www.jstage.jst.go.jp/article/ieejjia/8/2/8_359/_pdf

[Passive Component]
Yoshihiro Miwa, Toshihisa Shimizu, Koushi Takano, and Hitoshi Ishii”Calculating the Iron Losses in Gapped Inductors Using the Loss-Map Method,”IEEJ J. Industry Applications, vol. 8, no. 1, pp. 57-65, 2019.   
[Keywords: iron loss, inductor, air gap, buck converter]         

    https://www.jstage.jst.go.jp/article/ieejjia/8/1/8_57/_pdf

[Passive Component]
Tatsuya Yamamoto, Yasuyuki Konno, Kanako Sugimura, Toshiro Sato, Yinggang Bu, and Tsutomu Mizuno”Loss Reduction of LLC Resonant Converter using Magnetocoated Wire,”IEEJ J. Industry Applications, vol. 8, no. 1, pp. 51-56, 2019.     
[Keywords: copper loss, iron-based metal composite core, iron loss, magnetocoated wire] 

    https://www.jstage.jst.go.jp/article/ieejjia/8/1/8_51/_pdf

[Passive Component]
Tatsuya Yamamoto, Yinggang Bu, Tsutomu Mizuno, Yutaka Yamaguchi, and Tomoyoshi Kano”Loss Reduction of Transformer for LLC Resonant Converter Using a Magnetoplated Wire,”IEEJ J. Industry Applications, vol. 7, no. 1, pp. 43-48, 2018.         
[Keywords: copper loss, LLC resonant converter, magnetoplated wire, power density]       

    https://www.jstage.jst.go.jp/article/ieejjia/7/1/7_43/_pdf

[Passive Component]
Tomohide Shirakawa, Genki Yamasaki, Kazuhiro Umetani, and Eiji Hiraki”Extremum Co-Energy Principle for Analyzing AC Current Distribution in Parallel-Connected Wires of High-Frequency Power Inductors,”IEEJ J. Industry Applications, vol. 7, no. 1, pp. 35-42, 2018. 
[Keywords: AC current distribution, magnetic co-energy, inductor, magnetic circuit]     

    https://www.jstage.jst.go.jp/article/ieejjia/7/1/7_35/_pdf

[Power Device]
Hui-Chen Yang, Rejeki Simanjorang, and Kye Yak See”A Method of Junction Temperature Estimation for SiC Power MOSFETs via Turn-on Saturation Current Measurement,”IEEJ J. Industry Applications, vol. 8, no. 2, pp. 306-313, 2019.       
[Keywords: junction temperature estimation, saturation current, SiC Power MOSFET, threshold voltage]     

    https://www.jstage.jst.go.jp/article/ieejjia/8/2/8_306/_pdf

[Power Device]
Rene Barrera-Cardenas, Takanori Isobe, Marta Molinas”A Meta-Parameterized Approach for the Evaluation of Semiconductor Technologies”IEEJ J.Industry Applications, vol. 7,no .3, pp. 210-217, 2018.     
[Keywords: semiconductor evaluation, power losses, SiC MOSFET, IGBT, volume]     

    https://www.jstage.jst.go.jp/article/ieejjia/7/3/7_210/_pdf

[Train Application]
Shun Ichikawa, and Masafumi Miyatake, “Energy Efficient Train Trajectory in the Railway System with Moving Block Signaling Scheme,” IEEJ J. Industry Applications, vol. 8, no. 4, pp. 586–591, 2019.   
[Keywords: high-frequency train operation, moving block signaling system, energy efficiency, automatic train operation] 

   https://www.jstage.jst.go.jp/article/ieejjia/8/4/8_586/_pdf

[Train Application]
Yusuke Oki, Tomoyuki Ogawa, and Jun’ichiro Kawaguchi”Train Power Demand Control Using Decentralized and Parallel Control Scheme,”IEEJ J. Industry Applications, vol. 6, no. 6, pp. 482-489, 2017.       
[Keywords: power demand, decentralized control, min-max method, internal model control] 

    https://www.jstage.jst.go.jp/article/ieejjia/6/6/6_482/_pdf

[Train Application]
Keiichi Katsuta, Kenji Imamoto, and Hiroyuki Tani,”Ring Topology Railway Signalling with Information Sharing among Onboard and Switch Controllers”,IEEJ J. Industry Applications, vol.6, no.2, pp.130-139, 2017.       
[Keywords: communication-based train control (CBTC), rail transportation, signalling, telegram circulation]     

    https://www.jstage.jst.go.jp/article/ieejjia/6/2/6_130/_pdf

[Utility Application]
Tuomas Messo, Roni Luhtala, Aapo Aapro, and Tomi Roinila”Accurate Impedance Model of a Grid-Connected Inverter for Small-Signal Stability Assessment in High-Impedance Grids,”IEEJ J. Industry Applications, vol. 8, no. 3, pp. 488-496, 2019. 
[Keywords: DC-AC power converters, impedance, power conversion harmonics, renewable energy sources, stability analysis] 

    https://www.jstage.jst.go.jp/article/ieejjia/8/3/8_488/_pdf

[Utility Application]
Ayumu Tokiwa, Yukiharu Satake, Hiroaki Yamada, Toshihiko Tanaka, and Mitsunori Fukuda”Harmonic Current Compensation Using Constant DC-Capacitor Voltage-Control-Based Strategy of Three-Level Neutral-Point-Clamped Inverter-Based STATCOM with Reactive Power Control,”IEEJ J. Industry Applications, vol. 8, no. 2, pp. 352-358, 2019.       
[Keywords: neutral-point-clamped inverter, static synchronous compensator, constant dc-capacitor voltage control, reactive power control, harmonics compensation]       

    https://www.jstage.jst.go.jp/article/ieejjia/8/2/8_352/_pdf

[Utility Application]
Tomomichi Ito, Akira Kikuchi, Masahiro Taniguchi, Yoshitaka Takemoto, and Masaya Ichinose”Disturbance-robust Current Control Technique for Large-scale PV Inverter,”IEEJ J. Industry Applications, vol. 8, no. 2, pp. 314-321, 2019.   
[Keywords: PV inverter, Fault ride through, gate blocking]       

    https://www.jstage.jst.go.jp/article/ieejjia/8/2/8_314/_pdf

[Utility Application]
Hoai Nam Le and Jun-ichi Itoh”Discontinuous Current Mode Control for Minimization of Three-phase Grid-Tied Inverters in Photovoltaic System,”IEEJ J. Industry Applications, vol. 8, no. 1, pp. 90-97, 2019.     
[Keywords: three-phase grid-tied inverter, continuous current mode, discontinuous current mode] 

    https://www.jstage.jst.go.jp/article/ieejjia/8/1/8_90/_pdf

[Utility Application]
Fuka Ikeda, Toshihiko Tanaka, Hiroaki Yamada, and Masayuki Okamoto”Simple Harmonics Compensation Method for Smart Charger With Constant DC-Capacitor Voltage-Control for Electric Vehicles in Single-Phase Three-Wire Distribution Feeders,”IEEJ J. Industry Applications, vol. 8, no. 1, pp. 23-32, 2019.     
[Keywords: single-phase three-wire distribution feeders, harmonics compensation, constant dc-capacitor voltage control, three-leg PWM rectifier, single-phase PLL circuit, single-phase d-q coordinates]         

    https://www.jstage.jst.go.jp/article/ieejjia/8/1/8_23/_pdf

[Utility Application]
Kei Nishikawa, Fuka Ikeda, Hiroaki Yamada, Toshihiko Tanaka, and Masayuki Okamoto”Constant DC-Capacitor Voltage-Control-Based Strategy for Harmonics Compensation in Smart Charger for Electric Vehicles in Single-Phase Three-Wire Distribution Feeders With Reactive Power Control,”IEEJ J. Industry Applications, vol. 8, no. 1, pp. 116-123, 2019. 
[Keywords: single-phase three-wire distribution feeder, smart charger, reactive power control, three-leg PWM rectifier, constant dc-capacitor voltage control, single-phase d-q transformation] 

    https://www.jstage.jst.go.jp/article/ieejjia/8/1/8_116/_pdf

[Utility Application]
Satoshi Nagai and Jun-ichi Itoh”Open-loop-based Island-mode Voltage Control Method for Single-phase Grid-tied Inverter with Minimized LC Filter,”IEEJ J. Industry Applications, vol. 8, no. 1, pp. 108-115, 2019.       
[Keywords: grid-tied inverter, island-mode, minimized LC filter, open-loop-based voltage control]       

    https://www.jstage.jst.go.jp/article/ieejjia/8/1/8_108/_pdf

[Utility Application]
Ben Liu, Teruo Yoshino, and Atsuo Kawamura”Seamless Control of Grid-Connected Inverter during Single Phase Disconnection after Single Phase Fault in a Weak Grid,”IEEJ J. Industry Applications, vol. 7, no. 6, pp. 506-516, 2018.     
[Keywords: grid-connected inverter, single phase disconnection, auto-reclosing, single phase fault, fault ride through] 

    https://www.jstage.jst.go.jp/article/ieejjia/7/6/7_506/_pdf

[Utility Application]
Masaki Semasa, Toshiji Kato, and Kaoru Inoue”Simple and Effective Time Delay Compensation Method for Active Damping Control of Grid-Connected Inverter with an LCL Filter,”IEEJ J. Industry Applications, vol. 7, no. 6, pp. 454-461, 2018.     
[Keywords: Grid-Connected inverter, control time delay compensation, active damping, digital control, z-transform, sinusoidal compensator]       

    https://www.jstage.jst.go.jp/article/ieejjia/7/6/7_454/_pdf

[Utility Application]
Yichen Zhou, Yonggang Li, and Jiaomin Liu”Complete Models of Transmission-connected Photovoltaic Plant Using Modularity Principle for Power System Small Signal Stability Study,Q”IEEJ J. Industry Applications, vol. 6, no. 6, pp. 435-442, 2017.     
[Keywords: large transmission-connected PV plant, modularized modeling, complete small signal model, small signal stability]     

    https://www.jstage.jst.go.jp/article/ieejjia/6/6/6_435/_pdf

[Utility Application]
Mitsumasa Ushiroda, Takaaki Wakimoto, Hiroaki Yamada, Toshihiko Tanaka, Masayuki Okamoto, and Koji Kawahara, “Voltage Rise Suppression and Load Balancing by PV-PCS with Constant DC-Capacitor Voltage-Control-Based Strategy in Single-Phase Three-Wire Distribution Feeders,”IEEJ J. Industry Applications, vol. 6, no. 5, pp. 303-310, 2017.
[Keywords: photovoltaic power generation system, voltage-rise-suppression, constant dc-capacitor voltage control, reactive power control, power quality compensator, single-phase three-wire distribution feeder]       

    https://www.jstage.jst.go.jp/article/ieejjia/6/5/6_303/_pdf

[WPT]
Keita Furukawa, Keisuke Kusaka, and Jun-ichi Itoh, “General Analytical Model of Inductance Variation by EMF-canceling Coil for Inductive Power Transfer System,” IEEJ J. Industry Applications, vol. 8, no. 4, pp. 660–668, 2019.     
[Keywords:active shielding, electromagnetic field, inductive power transfer, multiple magnetic coupling]         

   https://www.jstage.jst.go.jp/article/ieejjia/8/4/8_660/_pdf

[WPT]
Keisuke Kusaka, Keita Furukawa, and Jun-ichi Itoh, “Development of Three-Phase Wireless Power Transfer System with Reduced Radiation Noise,” IEEJ J. Industry Applications, vol. 8, no. 4, pp. 600–607, 2019. 
[Keywords: inductive power transfer, wireless power transfer, three-phase, solenoid coil]       

   https://www.jstage.jst.go.jp/article/ieejjia/8/4/8_600/_pdf

[WPT]
Giorgio Lovison, Takehiro Imura, Hiroshi Fujimoto, and Yoichi Hori”Secondary-side-only Phase-shifting Voltage Stabilization Control with a Single Converter for WPT Systems with Constant Power Load,”IEEJ J. Industry Applications, vol. 8, no. 1, pp. 66-74, 2019.   
[Keywords: wireless power transfer, power control, constant power load, secondary side, phase shifting] 

    https://www.jstage.jst.go.jp/article/ieejjia/8/1/8_66/_pdf

[WPT]
Hiroki Ishida, Tomoaki Kyoden, and Hiroto Furukawa”Effectiveness of Convolutional Perfectly Matched Layer in Time-domain Numerical Analysis of Low-frequency Wireless Power Transfer,”IEEJ J. Industry Applications, vol. 8, no. 1, pp. 131-139, 2019. 
[Keywords:wireless power transmission, FDTD method, super low frequency, convolutional perfectly matched layer] 

    https://www.jstage.jst.go.jp/article/ieejjia/8/1/8_131/_pdf

[WPT]
Van-Duc Doan, Hiroshi Fujimoto, Takafumi Koseki, Tomio Yasuda, Hiroyuki Kishi, and Toshiyuki Fujita”CSimultaneous Optimization of Speed Profile and Allocation of Wireless Power Transfer System for Autonomous Driving Electric Vehicles,” IEEJ J.Industry Applications, vol. 7,no .2, pp. 189-201, 2018.     
[Keywords: electric vehicle, speed profile, wireless power transfer, infrastructure, optimization, differential evolution]       

    https://www.jstage.jst.go.jp/article/ieejjia/7/2/7_189/_pdf

[WPT]
Kazuki Hirono, Reona Hoshino, Tsuyoshi Kamiya, Shinji Wakao, Yoshifumi Okamoto, and Woojin Jeon”Design Optimization of Primary Core in Induction Heating Roll by the Combination of 2D Level-set Method and 3D Coupled Magnetic-Thermal FEM,” IEEJ J. Industry Applications, vol. 7, no. 1, pp. 64-72, 2018.   
[Keywords: coupled magnetic-thermal analysis, design optimization, finite element method, induction heating, level-set method, move-limit]       

    https://www.jstage.jst.go.jp/article/ieejjia/7/1/7_64/_pdf

[WPT]
Takahiro Koyama, Kazuhiro Umetani, and Eiji Hiraki”Design Optimization Method for the Load Impedance to Maximize the Output Power in Dual Transmitting Resonator Wireless Power Transfer System,” IEEJ J. Industry Applications, vol. 7, no. 1, pp. 49-55, 2018.       
[Keywords: dual transmitting resonators, magnetic coupling, wireless power transfer, load impedance]     

    https://www.jstage.jst.go.jp/article/ieejjia/7/1/7_49/_pdf

[WPT]
Giorgio Lovison, Daita Kobayashi, Motoki Sato, Takehiro Imura, and Yoichi Hori”Secondary-side-only Control for High Efficiency and Desired Power with Two Converters in Wireless Power Transfer Systems,”IEEJ J. Industry Applications, vol. 6, no. 6, pp. 473-481, 2017.       
[Keywords: wireless power transfer, power control, efficiency control, secondary side]   

    https://www.jstage.jst.go.jp/article/ieejjia/6/6/6_473/_pdf

[WPT]
Keisuke Kusaka, and Jun-ichi Itoh, “Development Trends of Inductive Power Transfer Systems Utilizing Electromagnetic Induction with Focus on Transmission Frequency and Transmission Power,”IEEJ J. Industry Applications, vol. 6, no. 5, pp. 328-339, 2017.   
[Keywords: inductive power transfer, wireless power transfer, electromagnetic induction, coupling coefficient]   

    https://www.jstage.jst.go.jp/article/ieejjia/6/5/6_328/_pdf

############################################
[D7: Motion Control, Robotics, Sensing and their Applications]

[Bilateral Control based on Layer Structure]
Kazuki Tanida, Toshiaki Okano, Toshiyuki Murakami, Kouhei Ohnishi, “An Approach to Architecture Design of Bilateral Control System based on a Layer Structure”, IEEJ J. Industry Applications, vol.9, no.4, pp.318–330, 2020.
[Keywords: teleoperation, human motion characteristics, different structure, multi-degree of freedom, top-down modular design, subsystem decomposition]

    https://www.jstage.jst.go.jp/article/ieejjia/9/4/9_318/_pdf/-char/en

[Trajectory Planning for Mobile Robot]
Masato Kobayashi, Naoki Motoi, “Hybrid Control of Trajectory Planning for Desired Trajectory and Collision Avoidance Based on Optimization Problem for a Wheeled Mobile Robot”, IEEJ J. Industry Applications, vol.9, no.4, pp.331–340, 2020.
[Keywords: motion control, robotics, trajectory tracking, collision avoidance, mobile robot]

    https://www.jstage.jst.go.jp/article/ieejjia/9/4/9_331/_pdf/-char/en

[Decoupling Control of Two-link Robot]
Tran Vu Trung, Makoto Iwasaki, “High-Performance Positioning using Decoupling Controllers for Flexible Two-Link Robots with Strain Wave Gears”, IEEJ J. Industry Applications, vol.9, no.4, pp.408–417, 2020.
[Keywords: lightweight robots, flexible robots, strain wave gear, decoupling control, vibration suppression]

    https://www.jstage.jst.go.jp/article/ieejjia/9/4/9_408/_pdf/-char/en

[Surveillance System for Multiple Moving Objects]
Daisuke Matsuka, Masahiro Mimura, “Surveillance System for Multiple Moving Objects”, IEEJ J. Industry Applications, vol.9, no.4, pp.460–467, 2020.
[Keywords: multiple moving objects surveillance, galvanometer scanner, visual servoing, UAV]

    https://www.jstage.jst.go.jp/article/ieejjia/9/4/9_460/_pdf/-char/en

[Anti-resonance Vibration Suppression Control]
Yasufumi Yoshiura, Yusuke Asai, Yasuhiko Kaku, Anti-resonance Vibration Suppression Control in Full-closed Control System, IEEJ Journal of Industry Applications, Volume 9, no. 3, pp. 311–317, 2020.
[Keywords: anti-resonance, vibration suppression, full-closed control]

    https://www.jstage.jst.go.jp/article/ieejjia/9/3/9_311/_pdf/-char/en

[Tool of Optimal Controller Design]
Jan Swevers, Laurens Jacobs, Taranjitsingh Singh, Dora Turk, Maarten Verbandt, Goele Pipeleers, “LCToolbox: Facilitating Optimal Linear Feedback Controller Design,” IEEJ J. Industry Applications, vol.9, no.2, pp.109–116, 2020.
[Keywords:robust control, H∞ loop shaping, control design software, CACSD, MATLAB]

    https://www.jstage.jst.go.jp/article/ieejjia/9/2/9_109/_pdf/-char/en

[Wearable sensors]
Kaiki Fukutoku, Takahiro Nozaki, Toshiyuki Murakami, “Measurement of Joint Moments using Wearable Sensors”, IEEJ J. Industry Applications, vol.9, no.2, pp.125–131, 2020.
[Keywords:rehabilitation, IMU, walking phase, floor reaction force, ZMP, joint moment]

    https://www.jstage.jst.go.jp/article/ieejjia/9/2/9_125/_pdf/-char/en

[Bilateral Control]
Daisuke Yashiro, Kazuhiro Yubai, Satoshi Komada, “Design of Adaptive Controller using Object Position for Bilateral Control System with Communication Delay”, IEEJ J. Industry Applications,vol.9, no.2, pp.149–158, 2020.
[Keywords:bilateral control, communication delay, disturbance observer, adaptive control, motion control, haptics]

    https://www.jstage.jst.go.jp/article/ieejjia/9/2/9_149/_pdf/-char/en

 [Networked motion control system]
Xiang Wu, Hui Dong, Jinhua She, Li Yu,”High-Precision Contour-Tracking Control of Ethernet-Based Networked Motion Control Systems,”
IEEJ J. Industry Applications, vol. 9, no. 1, pp. 1–10, 2020.
[Keywords:networked motion control system (NMCS), time-varying delays, iterative learning control, aperiodic disturbance, con- tour tracking control]

    https://www.jstage.jst.go.jp/article/ieejjia/9/1/9_1/_pdf/-char/ja

[Roll-to-roll web handling systems]
Kenta Seki, Takayuki Kikuchi, Makoto Iwasaki,”Tension Controller Design Considering Periodic Disturbance Suppression in Roll-to-Roll Web Handling Systems,”IEEJ J. Industry Applications, vol. 9, no. 1, pp.36–42, 2020.
[Keywords:roll-to-roll web handling systems, tension control, periodic disturbance, disturbance suppression, loop-shaping]

    https://www.jstage.jst.go.jp/article/ieejjia/9/1/9_36/_pdf/-char/ja

[Stable Contact Motion in Industrial Robots]
Yusuke Kawai, Yuki Yokokura, Kiyoshi Ohishi, Toshimasa Miyazaki,”Equivalent Resonance Ratio Control in Two-Spring System for Stable Contact Motion in Industrial Robots,”IEEJ J. Industry Applications, vol. 9, no. 1, pp.51–60, 2020.
[Keywords:resonance ratio control, vibration suppression, two-spring system, force impulse, stable contact motion]

    https://www.jstage.jst.go.jp/article/ieejjia/9/1/9_51/_pdf/-char/ja

[Actuator array]
Y. Osawa, and S. Katsura, “Thermal Rendering Based on Thermal Diffusion Equation,”IEEJ J. Industry Applications, vol. 8, no. 6, pp. 867–874, 2019.
[Keywords: actuator array, thermal rendering, heat conduction control, thermal diffusion equation, temperature distribution, peltier device]

    https://www.jstage.jst.go.jp/article/ieejjia/8/6/8_867/_pdf“

[Haptic control]
H. Muto, Y. Yokokura, and K. Ohishi,”Time-Variant Haptic Simulator Based on Fine and Fast Real-Time Discretization Using FDTD Method,”IEEJ J. Industry Applications, vol. 8, no. 6, pp. 926–933, 2019.
[Keywords: real-time discretization, time-variant system, FDTD method, multi-inertia resonance system, admittance control, hap- ticsimulator]

    https://www.jstage.jst.go.jp/article/ieejjia/8/6/8_926/_pdf“

[Vision control]
A. Oda, and Y. Tsutsumi,”Feasibility Study of Vision-based Localization Method for Stopping Control Using Real Environment Data,”IEEJ J. Industry Applications, vol. 8, no. 6, pp. 934–940, 2019.
[Keywords: stopping control, image recognition, localization]

    https://www.jstage.jst.go.jp/article/ieejjia/8/6/8_934/_pdf“

[Force control]
A. Yabuki, K. Ohishi, T. Miyazaki, and Y. Yokokura,”Quick Reaction Force Control for Three-Inertia Resonant System,”IEEJ J. Industry Applications, vol. 8, no. 6, pp. 941–952, 2019.
[Keywords: industrial robot, three-inertia system, reaction force control]     

    https://www.jstage.jst.go.jp/article/ieejjia/8/6/8_941/_pdf“

[Force control]
T. Uzunovic, A. Sabanovic, M. Yokoyama, and T. Shimono,”Novel Algorithm for Effective Position/Force Control,”IEEJ J. Industry Applications, vol. 8, no. 6, pp. 960–966, 2019.
[Keywords: position/force control, robust control, smart actuators, disturbance observer]

    https://www.jstage.jst.go.jp/article/ieejjia/8/6/8_960/_pdf“

[Motion control]
S. Nishimura, and S. Katsura,”Hybrid Motion Reproduction Using Master/Slave Type Motion-Copying System,”IEEJ J. Industry Applications, vol. 8, no. 6, pp. 967–974, 2019.
[Keywords: acceleration control, position control, force control, modal transformation, motion-copying system]

    https://www.jstage.jst.go.jp/article/ieejjia/8/6/8_967/_pdf“

[Rotary encoder]
K. Yamamoto, K. Otomo, and H. Hashimoto,”Development of Absolute Magnetic Rotary Encoder with Eccentric Rotation,”IEEJ J. Industry Applications, vol. 8, no. 6, pp. 991–996, 2019.
[Keywords: magnetic encoder, absolute encoder]

    https://www.jstage.jst.go.jp/article/ieejjia/8/6/8_991/_pdf“

[Bilateral Control]
Kazuki Tanida, Toshiaki Okano, Toshiyuki Murakami, Kouhei Ohnishi, “Control Structure Determination of Bilateral System based on Reproducibility and Operationality,”IEEJ J. Industry Applications, vol. 8, no. 5, pp. 767-778, 2019.   
[Keywords: bilateral control, reproducibility, operationality, phase-lead compensator]   

    https://www.jstage.jst.go.jp/article/ieejjia/8/5/8_767/_pdf

[Motion Control]
Kenta Nagano, Tomoyuki Shimono, Yasutaka Fujimoto,”Backdrivability Improvement Method Based on Angular Transmission Error in a High Reduction Gear,”IEEJ J. Industry Applications, vol. 8, no. 5, pp. 779-786, 2019.   
[Keywords: backdrivability, angular transmission error, reduction gear] 

    https://www.jstage.jst.go.jp/article/ieejjia/8/5/8_779/_pdf

[Motion Control]
Kenta Nagano, Yasutaka Fujimoto, “Simplification of Motion Generation in the Singular Configuration of a Wheel-Legged Mobile Robot,” IEEJ J. Industry Applications, vol. 8, no. 5, pp. 745-755, 2019.   
[Keywords: wheel-legged mobile robot, inverse kinematic calculation, singular configuration, Levenberg-Marquardt method]         

    https://www.jstage.jst.go.jp/article/ieejjia/8/5/8_745/_pdf

[Advanced Motion Control]
Tom Oomen, “Advanced Motion Control for Precision Mechatronics: Control, Identification, and Learning of Complex Systems,” IEEJ J. Industry Applications, vol. 7, no. 2, pp. 127-140, 2018.     
[Keywords: mechatronics, motion control, robust control, multivariable control, system identification, iterative learning control]       

    https://www.jstage.jst.go.jp/article/ieejjia/7/2/7_127/_pdf

[Autonomous Driving]
Yusuke Nakamura, and Toshiyuki Murakami, “Advanced Deceleration Control Considering Driving Resistance by Predicting the Position of Pedestrians,” IEEJ J. Industry Applications, vol. 8, no. 2, pp. 334-341, 2019.     
[Keywords: Autonomous Emergency Braking System (AEBS), Model Predictive Control (MPC), Driving Force Observer (DFOB), Kalman filter]     

    https://www.jstage.jst.go.jp/article/ieejjia/8/2/8_334/_pdf

[Bilateral Control]
Hiroki Murata, and Seiichiro Katsura, “Improvement of Operationality Under Time Varying Delay for Bilateral Teleoperation Systems by Differential Signal Based Data Modulation”,IEEJ J. Industry Applications, vol.6, no.3, pp.245-251, 2017.   
[Keywords: bilateral teleoperation system, network communication, time varying delay, operationality, data modulation]   

    https://www.jstage.jst.go.jp/article/ieejjia/6/3/6_245/_pdf

[Collision Avoidance]
Naoki Motoi, Masato Kobayashi, and Ryo Masaki, “Remote Control Method for Mobile Robot Based on Force Feedback Generated using Collision Prediction Map,” IEEJ J. Industry Applications, vol. 8, no. 4, pp. 727–735, 2019.     
[Keywords: motion control, mobile robot, remote control, force feedback]         

    https://www.jstage.jst.go.jp/article/ieejjia/8/4/8_727/_pdf

[Damping Control]
Tran Vu Trung, and Makoto Iwasaki, “Robust 2-DoF Controller Design using H∞ Synthesis for Flexible Robots,” IEEJ J. Industry Applications, vol. 8, no. 4, pp. 623–631, 2019.     
[Keywords: flexible robots, H∞ controller design, acceleration feedback, robust control, vibration suppression] 

    https://www.jstage.jst.go.jp/article/ieejjia/8/4/8_623/_pdf

[Damping Control]
Hiroki Kurumatani, Yuuki Inoue, Satoshi Nishimura, Masahiko Isaka, Ryo Shimane, Takuya Tanaka, and Seiichiro Katsura, “Vibration Suppression of Electromagnetic-Force-Restoration Weighing Cell Using Wave Control,” IEEJ J. Industry Applications, vol. 8, no. 4, pp. 576–585, 2019. 
[Keywords: sensorless force control, disturbance observer, nominal parameter]   

    https://www.jstage.jst.go.jp/article/ieejjia/8/4/8_576/_pdf

[Damping Control]
Sho Sakaino, Tomoki Sakuma, and Toshiaki Tsuji, “A Control Strategy for Electro-hydrostatic Actuator Considering Static Friction, Resonance, and Oil Leakage,” IEEJ J. Industry Applications, vol. 8, no. 2, pp. 279-286, 2019.         
[Keywords: electro-hydrostatic actuator, hydraulic motor, two-mass resonant system, self resonance cancellation]         

    https://www.jstage.jst.go.jp/article/ieejjia/8/2/8_279/_pdf

[Damping Control]
Yoshiyuki Urakawai, “Vibration Suppression in Position Control System by Pole Zero Cancellation using Limited Pole Placement Method,” IEEJ J. Industry Applications, vol. 8, no. 2, pp. 256-262, 2019. 
[Keywords: resonant system, feedforward controller, two-mass resonant system, pole zero cancellation, limited pole placement method]     

    https://www.jstage.jst.go.jp/article/ieejjia/8/2/8_256/_pdf

[Damping Control]
Kenta Seki, Daisuke Noda, and Makoto Iwasaki, “Dual-loop Controller Design Considering Robust Vibration Suppression in Piezo-actuated Stage Systems,” IEEJ J. Industry Applications, vol. 7, no. 6, pp. 488-494, 2018. 
[Keywords:  high-precision positioning, vibration suppression, loop-shaping, robust property, piezo-actuated stages]     

    https://www.jstage.jst.go.jp/article/ieejjia/7/6/7_488/_pdf

[Damping Control]
Yasufumi Yoshiura, Shouta Kawahara, Daichi Horimai, Tetsuya Asai, and Yasuhiko Kaku “Vibration Suppression Control Using an Equivalent Rigid-Body Observer,”IEEJ J. Industry Applications, vol. 7, no. 5, pp. 396-402, 2018.   
[Keywords: vibration suppression control, equivalent rigid-body velocity]       

    https://www.jstage.jst.go.jp/article/ieejjia/7/5/7_396/_pdf

[Damping Control]
Yuuki Inoue, Seiichiro Katsura, “Spatial Disturbance Suppression of a Flexible System Based on Wave Model,” IEEJ J.Industry Applications, vol. 7,no .3, pp. 236-243, 2018.     
[Keywords: robust control, vibration control, wave system, reflected wave rejection, spatial disturbance]       

    https://www.jstage.jst.go.jp/article/ieejjia/7/3/7_236/_pdf

[Damping Control]
Wataru Ohnishi, Hiroshi Fujimoto, Pai-Hsueh Yang, Ping-Wei Chang, Bausan Yuan, Koichi Sakata, and Atsushi Hara, “Acoustic Wave Equation Based Modeling and Collocated Side Vibration Cancellation for Pneumatic Cylinder,” IEEJ J. Industry Applications, vol. 7, no. 2, pp. 109-116, 2018.     
[Keywords: pneumatic actuator, wave equation, partial differential equation]     

    https://www.jstage.jst.go.jp/article/ieejjia/7/2/7_109/_pdf

[Damping Control]
Takashi Kai, Hiroyuki Sekiguchi, and Hidetoshi Ikeda, “Relative Vibration Suppression in a Positioning Machine Using Acceleration Feedback Control,” IEEJ J. Industry Applications, vol. 7, no. 1, pp. 15-21, 2018.     
[Keywords: servo motor, acceleration feedback, vibration control, rocking mode, machine stand, disturbance localization]         

    https://www.jstage.jst.go.jp/article/ieejjia/7/1/7_15/_pdf

[Damping Control]
Kenta Tsuda, Tomoki Sakuma, Kodai Umeda, Sho Sakaino, and Toshiaki Tsuji, “Resonance-suppression Control for Electro-hydrostatic Actuator as Two-inertia System,” IEEJ J. Industry Applications, vol. 6, no. 5, pp. 320-327, 2017.     
[Keywords: electro-hydrostatic actuator, hydraulic closed-loop circuit, two-inertia system, resonance ratio control]     

    https://www.jstage.jst.go.jp/article/ieejjia/6/5/6_320/_pdf

[Deadbeat Control]
Noriaki Hirose, and Ryosuke Tajima, “Deadbeat Feedforward Compensation with Frequency Shaping of Position Feedforward Controller,” IEEJ J. Industry Applications, vol.6, no.2, pp.100-106, 2017.       
[Keywords: feedforward control, continuous path control, deadbeat control, fast and precise positioning, industrial robot]       

    https://www.jstage.jst.go.jp/article/ieejjia/6/2/6_100/_pdf

[Digital Data Protection]
Yuefei Gao, and Hajime Nobuhara, “A Decentralized Trusted Timestamping Based on Blockchains,” IEEJ J. Industry Applications, vol. 6, no. 4, pp. 252-257, 2017. 
[Keywords: trusted timestamping, blockchain, digital data protection]   

    https://www.jstage.jst.go.jp/article/ieejjia/6/4/6_252/_pdf

[Driving Assistance]
Baptiste Rouzier, and Toshiyuki Murakami, “Line Crossing Assistance Based on Situation Modulated Potentials Using Stereo Camera Detection,” IEEJ J. Industry Applications, vol. 6, no. 4, pp. 286-294, 2017.   
[Keywords: driving assistant, stereo camera, virtual potential] 

    https://www.jstage.jst.go.jp/article/ieejjia/6/4/6_286/_pdf

[Force Control]
Hiroshi Asai, Tomoyuki Shimono, and Takahiro Mizoguchi, “Disturbance Modeling based on Fourier Series for Precise Reaction Force Estimation in Semicircular Linear Motor,” IEEJ J. Industry Applications, vol. 8, no. 3, pp. 512-521, 2019.     
[Keywords: haptics, force control, bilateral control, tubular motor, disturbance model] 

    https://www.jstage.jst.go.jp/article/ieejjia/8/3/8_512/_pdf

[Force Control]
Hiroki Kurumatani, and Seiichiro Katsura, “Design of Nominal Parameters for Robust Sensorless Force Control Based on Disturbance Observer,” IEEJ J. Industry Applications, vol. 8, no. 2, pp. 342-351, 2019.   
[Keywords: sensorless force control, disturbance observer, nominal parameter]   

    https://www.jstage.jst.go.jp/article/ieejjia/8/2/8_342/_pdf

[Force Control]
Sakahisa Nagai, Roberto Oboe, Tomoyuki Shimono, and Atsuo Kawamura, “Fast Force Control without Force Sensor Using Combination of aaKF and RFOB for In-circuit Test with Probing System,” IEEJ J. Industry Applications, vol. 8, no. 2, pp. 152-159, 2019.     
[Keywords:probing system, force control, acceleration aided Kalman filter, reaction force observer]     

    https://www.jstage.jst.go.jp/article/ieejjia/8/2/8_152/_pdf

[Force Control]
Hiroshi Nakamura, Kiyoshi Ohishi, Yuki Yokokura, Naoki Kamiya, Toshimasa Miyazaki, and Akifumi Tsukamoto, “Force Sensorless Fine Force Control Based on Notch-Type Friction-Free Disturbance Observers,” IEEJ J. Industry Applications, vol. 7, no. 2, pp. 117-126, 2018.       
[Keywords: force sensorless force control, disturbance observer, reaction force observer, industrial robot]     

    https://www.jstage.jst.go.jp/article/ieejjia/7/2/7_117/_pdf

[Force Estimation]
Kodai Umeda, Tomoki Sakuma, Kenta Tsuda, Sho Sakaino, Toshiaki Tsuji, “Reaction Force Estimation of Electro-hydrostatic Actuator Using Reaction Force Observer,” IEEJ J.Industry Applications, vol. 7,no .3, pp. 250-258, 2018.
[Keywords: electro-hydrostatic actuator, reaction force observer, feedback modulator, backlash compensation, oil leakage compensation]   

    https://www.jstage.jst.go.jp/article/ieejjia/7/3/7_250/_pdf

[Haptics]
Satoshi Nishimura, Yukiko Osawa, Hiroki Kurumatani, Yuki Nagatsu, Kazumasa Miura, and Seiichiro Katsura “Simultaneous Presentation of Thermal and Tactile Sensations Using Multilateral Control under Time Delay,”IEEJ J. Industry Applications, vol. 7, no. 5, pp. 378-386, 2018       
[Keywords:acceleration control, disturbance observer, multilateral control, communication delay, multimodal rendering]   

    https://www.jstage.jst.go.jp/article/ieejjia/7/5/7_378/_pdf

[Haptics]
Toshiaki Tsuji, Kyo Kutsuzawa, and Sho Sakaino, “Optimized Trajectory Generation based on Model Predictive Control for Turning Over Pancakes,” IEEJ J. Industry Applications, vol. 7, no. 1, pp. 22-28, 2018.   
[Keywords: haptics, manipulation, kinodynamics, trajectory planning]     

    https://www.jstage.jst.go.jp/article/ieejjia/7/1/7_22/_pdf

[Haptics]
Sho Masuyama, Takuya Noguchi, and Atsuo Kawamura, “Electromagnetic Linear Actuator with Two Stators and One Rotor for Tactile Display,” IEEJ J. Industry Applications, vol.6, no.2, pp.160-164, 2017.   
[Keywords: actuator, tactile display, haptics]   

     https://www.jstage.jst.go.jp/article/ieejjia/6/2/6_160/_pdf

[Haptics]
Hiroyuki Kitamura, Sho Sakaino, and Toshiaki Tsuji, “Contact Point Calculation on a Haptic Interface Utilizing Differentiated Force,” IEEJ J. Industry Applications, vol.6, no.2, pp.151-159, 2017.     
[Keywords: force sensor, haptic interface, differentiation, noise]       

    https://www.jstage.jst.go.jp/article/ieejjia/6/2/6_151/_pdf

[Haptics]
Koyo Yu, Takuya Matsunaga, Hiromasa Kawana, Shin Usuda, and Kouhei Ohnishi, “Frequency-Based Analysis of the Relationship between Cutting Force and CT Number for an Implant-Surgery-Teaching Robot,” IEEJ J. Industry Applications, vol.6, no.1, pp.66-72, 2017.       
[Keywords: haptic, haptic dental training, CT number estimation, drilling system, motion control, vibration modeling]   

    https://www.jstage.jst.go.jp/article/ieejjia/6/1/6_66/_pdf

[Heat Sensing]
Yukiko Osawa, and Seiichiro Katsura”Variable Heat Disturbance Observer for Control of Peltier Device,”IEEJ J. Industry Applications, vol. 8, no. 2, pp. 185-191, 2019. 
[Keywords:peltier device, thermoelectric conversion elements, variable heat disturbance observer, robust temperature control]   

    https://www.jstage.jst.go.jp/article/ieejjia/8/2/8_185/_pdf

[Human-machine Interaction]
Yusuke Kawai, Yuki Yokokura, Kiyoshi Ohishi, and Toshimasa Miyazaki, “Smooth Human Interaction Control using Torsion Torque Controller and Motor-side Normalization Compensator Focusing on Back-forward Drivability,” IEEJ J. Industry Applications, vol. 8, no. 2, pp. 322-333, 2019.
[Keywords: back-forward drivability, vibration suppression, human interaction, two-inertia system]       

    https://www.jstage.jst.go.jp/article/ieejjia/8/2/8_322/_pdf

[Human-machine Interaction]
Ryo Hanaoka, Takahiro Nozaki, and Toshiyuki Murakami, “Translation and Inclination Control for Intelligent Tension Pole Based on Mode Decoupling Method,” IEEJ J. Industry Applications, vol. 7, no. 2, pp. 158-165, 2018.     
[Keywords: tension pole, handrail, motion assistance, mode decoupling, inertial measurement unit (IMU)] 

    https://www.jstage.jst.go.jp/article/ieejjia/7/2/7_158/_pdf

[Kalman Filter]
Hiroki Kurumatani, and Seiichiro Katsura”State Estimation Based on Multirate Kalman Filter for Power Systems Driven by Switching Inverter,”IEEJ J. Industry Applications, vol. 8, no. 2, pp. 231-239, 2019.     
[Keywords:multirate system, Kalman filter, power electronics]   

    https://www.jstage.jst.go.jp/article/ieejjia/8/2/8_231/_pdf

[Learning Control]
Ernst Csencsics, Shingo Ito, Johannes Schlarp, and Georg Schitter, “System Integration and Control for 3D Scanning Laser Metrology,” IEEJ J. Industry Applications, vol. 8, no. 2, pp. 207-217, 2019.   
[Keywords:mechatronic imaging systems, system integration, scanning laser metrology, model based control, iterative learning control]   

    https://www.jstage.jst.go.jp/article/ieejjia/8/2/8_207/_pdf

[Linear Resonant Actuator]
Masayuki Kato, and Katsuhiro Hirata, “Characteristic Evaluation of Linear Resonant Actuator Utilizing Electrical Resonance,” IEEJ J. Industry Applications, vol. 7, no. 2, pp. 175-180, 2018.   
[Keywords: electrical resonance, finite element analysis, linear oscillatory actuators (LOA), linear resonant actuators (LRA), mechanical resonance, electromagnetic actuators] 

    https://www.jstage.jst.go.jp/article/ieejjia/7/2/7_175/_pdf

[Mechanical Impedance Control]
Shin’ichi Osada, Tomoyuki Shimono, Takahiro Mizoguchi, Kouhei Ohnishi, “Active Motion Evaluation by Mechanical Power Factor Analysis Based on Specific Frequency Component,” IEEJ J.Industry Applications, vol. 7,no .3, pp. 244-249, 2018.     
[Keywords: human support, power factor, motion evaluation, motion control, force control, compliance control]   

    https://www.jstage.jst.go.jp/article/ieejjia/7/3/7_244/_pdf

[Mechanical Impedance Control]
Yusuke Asai, Yuki Yokokura, and Kiyoshi Ohishi, “Mechanical Admittance Realization Control Based on Feedforward Compensation for Fine Realization of Impedance,” IEEJ J. Industry Applications, vol.6, no.2, pp.83-90, 2017.   
[Keywords: admittance realization control, motion control, real-world haptics, feedforward compensation]         

    https://www.jstage.jst.go.jp/article/ieejjia/6/2/6_83/_pdf

[Motion Control]
Junya Tsunoda, Sho Sakaino, and Toshiaki Tsuji, “Development of an Angle Measurement System Using Monocular Camera and Moire Patterns,” IEEJ J. Industry Applications, vol. 8, no. 2, pp. 200-206, 2019.       
[Keywords:human motion tracking, Moire fringe, joint angle]     

    https://www.jstage.jst.go.jp/article/ieejjia/8/2/8_200/_pdf

[Motion Control]
Hisayoshi Muramatsu, and Seiichiro Katsura, “An Enhanced Periodic-Disturbance Observer for Improving Aperiodic-Disturbance Suppression Performance,” IEEJ J. Industry Applications, vol. 8, no. 2, pp. 177-184, 2019.   
[Keywords:disturbance observer, motion control, periodic disturbance, periodic-disturbance observer, time-delay element]         

    https://www.jstage.jst.go.jp/article/ieejjia/8/2/8_177/_pdf

[Motion Control]
Shingo Ito, Stefan Troppmair, Francesco Cigarini, and Georg Schitter, “High-speed Scanner with Nanometer Resolution Using a Hybrid Reluctance Force Actuator,” IEEJ J. Industry Applications, vol. 8, no. 2, pp. 170-176, 2019.
[Keywords:high-precision actuators, hybrid reluctance actuator, nanopositioning, motion control]         

    https://www.jstage.jst.go.jp/article/ieejjia/8/2/8_170/_pdf

[Motion Control]
Akira Yamaguchi, Kiyoshi Ohishi, Yuki Yokokura, Toshimasa Miyazaki, and Kotaro Sasazaki, “Backlash-based Shock Isolation Control for Jerk Reduction in Clutch Engagement,” IEEJ J. Industry Applications, vol. 8, no. 2, pp. 160-169, 2019.     
[Keywords:two-inertia system, final-state control, coasting, backlash, dead-zone, motion control]       

   https://www.jstage.jst.go.jp/article/ieejjia/8/2/8_160/_pdf

[Motion Control]
M.K.C. Dinesh Chinthaka and Tomoyuki Shimono”Inertia Compensation of Motion Copying System for Dexterous Object Handling,”IEEJ J. Industry Applications, vol. 7, no. 6, pp. 495-505, 2018.     
[Keywords:motion copying, motion reproduction, inertia estimation, viscous friction estimation] 

    https://www.jstage.jst.go.jp/article/ieejjia/7/6/7_495/_pdf

[Motion Control]
Takashi Ohhira, and Akira Shimada “Movement Control Based on Model Predictive Control with Disturbance Suppression using Kalman Filter including Disturbance Estimation,”IEEJ J. Industry Applications, vol. 7, no. 5, pp. 387-395, 2018.       
[Keywords: model predictive control (MPC), Kalman ?lter (KF), disturbance estimation, disturbance suppression, motion control, multivariable control]   

    https://www.jstage.jst.go.jp/article/ieejjia/7/5/7_387/_pdf

[Motion Control]
Yoshihiro Maeda, and Makoto Iwasaki,” Feedforward Friction Compensation Using the Rolling Friction Model for Micrometer-stroke Point-to-point Positioning Motion,” IEEJ J. Industry Applications, vol. 7, no. 2, pp. 141-149, 2018.     
[Keywords: rolling friction, micrometer-stroke motion, response dispersion, friction model, initial friction compensation, fast and precise positioning]         

    https://www.jstage.jst.go.jp/article/ieejjia/7/2/7_141/_pdf

[Motion Control]
Thao Tran Phuong, Kiyoshi Ohishi, Chowarit Mitsantisuk, Yuki Yokokura, Kouhei Ohnishi, Roberto Oboe, and Asif Sabanovic, “Disturbance Observer and Kalman Filter Based Motion Control Realization,” IEEJ J. Industry Applications, vol. 7, no. 1, pp. 1-14, 2018.       
[Keywords: disturbance observer, Kalman filter, motion control, acceleration control, force control, real-world haptics]         

    https://www.jstage.jst.go.jp/article/ieejjia/7/1/7_1/_pdf

[Motion Control]
Masahide Ito, Kazuyoshi Kawatsu, and Masaaki Shibata, “Kinematic Control of Redundant Manipulators for Admitting Joint Range of Motion Maximally,” IEEJ J. Industry Applications, vol. 6, no. 4, pp. 278-285, 2017.     
[Keywords: kinematically redundant manipulators, joint limits, inverse kinematics, redundancy resolution, kinematic control]     

    https://www.jstage.jst.go.jp/article/ieejjia/6/4/6_278/_pdf

[Motion Control]
Sho Sakaino, Hiroyuki Kawajiri, and Toshiaki Tsuji, “Determination of Torque Distribution Ratio for Electric Bicycle with Independently Driven Front and Rear Wheels”,IEEJ J. Industry Applications, vol.6, no.3, pp.223-230, 2017.     
[Keywords: electric bicycle, Kalman filter, torque distribution ratio]   

    https://www.jstage.jst.go.jp/article/ieejjia/6/3/6_223/_pdf

[Motion Control]
Takenori Atsumi,”Estimation Method of Unobservable Oscillations in Sampled-Data Positioning Systems”,IEEJ J. Industry Applications, vol.6, no.3, pp. 199-204,2017.     
[Keywords: sampled-data control, digital control, motion control, vibration control, hard disk drive]   

    https://www.jstage.jst.go.jp/article/ieejjia/6/3/6_199/_pdf

[Motion Control]
Hisayoshi Muramatsu, and Seiichiro Katsura, “Design of an Infinite-Order Disturbance Observer Enhancing Disturbance Suppression Performance”,IEEJ J. Industry Applications, vol.6, no.3, pp.192-198, 2017.     
[Keywords: periodic disturbance, disturbance observer, infinite-order disturbance observer, time-delay element] 

    https://www.jstage.jst.go.jp/article/ieejjia/6/3/6_192/_pdf

[Motion Control]
Keisuke Yoshida, Kiyoshi Ohishi, Toshimasa Miyazaki, Yuki Yokokura, and Junichi Fukui,”Full FPGA Tracking Control System Based on Error-Based Communication Disturbance Observer Considering Time Delay for Optical Disc System”,IEEJ J. Industry Applications, vol.6, no.2, pp.91-99, 2017.   
[Keywords: optical disc, motion control, tracking control, time delay, FPGA, communication disturbance observer]         

    https://www.jstage.jst.go.jp/article/ieejjia/6/2/6_91/_pdf

[Motion Control]
Asif Sabanovic, “Challenges in Motion Control Systems,” IEEJ J. Industry Applications, vol.6, no.2, pp.107-116, 2017.   
[Keywords: motion control, acceleration control, disturbance observer, functionally related systems, human-in-the-loop, cyberphysical systems]   

   https://www.jstage.jst.go.jp/article/ieejjia/6/2/6_107/_pdf

[Nonlinear Control]
Matthias Bibl, Christoph Zech, and Georg Schitter, “Vision-Based Nonlinear Feedback Control of a Ball on Ball System With a Programmable Logic Controller,” IEEJ J. Industry Applications, vol. 8, no. 4, pp. 713–719, 2019.   
[Keywords: ball on ball, nonlinear control, vision based measurement, programmable logic controller]     

    https://www.jstage.jst.go.jp/article/ieejjia/8/4/8_713/_pdf

[PID Control]
Hideaki Hirahara, Akira Tanaka, Shu Yamamoto, and Takahiro Ara, “Systematic Design of Two-Degree-of-Freedom PID Controller for Positioning and Tracking Drives of Linear Servo Motors,” IEEJ J. Industry Applications, vol. 6, no. 6, pp. 443-448, 2017.       
[Keywords: linear servo motor, two-degree-of-freedom PID position controller, pole-zero assignment, pole-angle] 

    https://www.jstage.jst.go.jp/article/ieejjia/6/6/6_443/_pdf

[Pole Placement]
Yoshiyuki Urakawa, “Lens Position Control System Using Limited Pole Placement Method,” IEEJ J. Industry Applications, vol.6, no.2, pp.117-123, 2017.   
[Keywords: camera module, autofocus, lens position control, limited pole placement method, feedforward control] 

    https://www.jstage.jst.go.jp/article/ieejjia/6/2/6_117/_pdf

[Precise Tracking Control]
Wataru Ohnishi, and Hiroshi Fujimoto, “Perfect Tracking Control Method by Multirate Feedforward and State Trajectory Generation based on Time Axis Reversal,” IEEJ J. Industry Applications, vol. 7, no. 1, pp. 93-101, 2018.   
[Keywords: time axis reversal, multirate feedforward, unstable intrinsic zeros, unstable discretization zeros]   

    https://www.jstage.jst.go.jp/article/ieejjia/7/1/7_93/_pdf

[Relay Feedback System]
Michael Ruderman”Relay Feedback Systems – Established Approaches and New Perspectives for Application,”IEEJ J. Industry Applications, vol. 8, no. 2, pp. 271-278, 2019.
[Keywords: relay feedback systems, harmonic balance, nonlinearity, limit cycles, backlash identification, hysteresis]   

    https://www.jstage.jst.go.jp/article/ieejjia/8/2/8_271/_pdf

[Speed Control]
Junichi Fukui and Toshimasa Miyazaki, “Speed Control Method for Tilling Claw of Electric Tiller Considering Actual Periodic Reaction Torque,” IEEJ J. Industry Applications, vol. 8, no. 3, pp. 539-547, 2019. 
[Keywords: electric tiller, speed control, repetitive control, reaction torque from tilling]     

    https://www.jstage.jst.go.jp/article/ieejjia/8/3/8_539/_pdf

[Steering System]
Jun-ya Nagase, Fumika Fukunaga, Kan Ishida, Norihiko Saga, “Steering System of Cylindrical Elastic Crawler Robot,” IEEJ J. Industry Applications, vol. 7, no. 5, pp. 441-442, 2018.     
[Keywords:in-pipe robot, cylindrical crawler robot, steering mechanism, slider] 

    https://www.jstage.jst.go.jp/article/ieejjia/7/5/7_441/_pdf

[Teleoperation System]
Shuhei Akutsu, Hiromu Sekiguchi, Takahiro Nozaki, and Toshiyuki Murakami, “Position and Torque Sensorless Motion Transmission Using Voltage Compensation,” IEEJ J. Industry Applications, vol. 7, no. 2, pp. 150-157, 2018.     
[Keywords: sensorless drive, brushed DC motor, bilateral teleoperation, haptic transmission, motor-generator set]       

    https://www.jstage.jst.go.jp/article/ieejjia/7/2/7_150/_pdf

[Teleoperation System]
Hiromu Norizuki, and Yutaka Uchimura, “Contact Prediction Control for a Teleoperation System with Time Delay,” IEEJ J. Industry Applications, vol. 7, no. 1, pp. 102-108, 2018.         
[Keywords: model predictive control, teleoperation system, time delay, network based control]   

    https://www.jstage.jst.go.jp/article/ieejjia/7/1/7_102/_pdf

[Tracking Control]
Masahiro Mae, Wataru Ohnishi, Hiroshi Fujimoto, and Yoichi Hori, “Perfect Tracking Control Considering Generalized Controllability Indices and Application for High-Precision Stage in Translation and Pitching,” IEEJ J. Industry Applications, vol. 8, no. 2, pp. 263-270, 2019.     
[Keywords: multirate feedforward, multi-input multi-output system, high-precision stage]         

    https://www.jstage.jst.go.jp/article/ieejjia/8/2/8_263/_pdf

[Traffic Management System]
Koichiro Iwaoka, and Yuzo Hirotsu, “Failure Detection Method using Aggregated Vehicle Detector Data,” IEEJ J. Industry Applications, vol. 6, no. 4, pp. 295-302, 2017. 
[Keywords: failure detection, aggregated data, vehicle detector]         

    https://www.jstage.jst.go.jp/article/ieejjia/6/4/6_295/_pdf

[Ultrasonic Positioning System]
Naoki Fujieda, Takumi Shinohara, Shuichi Ichikawa, Yuhki Sakaguchi, Shunsuke Matsuoka, and Hideki Kawaguchi, “Attenuation Model for Error Correction of Ultrasonic Positioning System,” IEEJ J. Industry Applications, vol. 7, no. 2, pp. 181-188, 2018.       
[Keywords: positioning system, ultrasonic wave, embedded system, microcontroller]       

    https://www.jstage.jst.go.jp/article/ieejjia/7/2/7_181/_pdf

[Unmanned Aerial Vehicle]
Jun-ichi Itoh, Kazuki Kawamura, Keisuke Kusaka, Yoshiya Ohnuma, Hiroyuki Koshikizawa, and Kazuyuki Abe, “Control of Starter Generator in a UAV with a Micro Jet Engine,” IEEJ J. Industry Applications, vol. 8, no. 3, pp. 421-429, 2019.       
[Keywords: starter generator, jet engine, unmanned aerial vehicle (UAV), V/f control]   

    https://www.jstage.jst.go.jp/article/ieejjia/8/3/8_421/_pdf

############################################
[D8: Electric Machine, Motor Drive and their Applications]

[Robust Estimation for Stator Temperature]
Hiroki Iwata, Kiyoshi Ohishi, Yuki Yokokura, Yuji Okada, Yuji Ide, Daigo Kuraishi, Akihiko Takahashi, “Robust Estimation Method for Stator Temperature Based on Voltage Disturbance Observer Autotuning Resistance for SPMSM”, IEEJ J. Industry Applications, vol.9, no.4, pp.341–350, 2020.
[Keywords: thermal sensorless, motor model, permanent magnet synchronous motor, disturbance observer, armature temperature]

    https://www.jstage.jst.go.jp/article/ieejjia/9/4/9_341/_pdf/-char/en

[Model Predictive Control for PMSM]
Chaodong Jiang, Jun Yang, Shihua Li, Mengdi Zhou, Kaifeng Yang, “Friction-Compensation and Extended State Observer Based Model Predictive Control for PMSM Servo Systems”, IEEJ J. Industry Applications, vol.9, no.4, pp.351–357, 2020.
[Keywords: model predictive control, friction compensation, extended state observer, PMSM servo systems]

    https://www.jstage.jst.go.jp/article/ieejjia/9/4/9_351/_pdf/-char/en

[Low-Computational-Cost Controller for EV]
Mitsuhiro Hattori, Hiroshi Fujimoto, Yoichi Hori, Yusuke Takeda, Koji Sato, “Simple Tuning and Low-Computational-Cost Controller for Enhancing Energy Efficiency of Autonomous-Driving Electric Vehicles”, IEEJ J. Industry Applications, vol.9, no.4, pp.358–365, 2020.
[Keywords: electric vehicle, energy efficiency, autonomous driving, linear quadratic regulator, linear parameter varying system]

    https://www.jstage.jst.go.jp/article/ieejjia/9/4/9_358/_pdf/-char/en

[Detent Force Reduction for PMLSM]
Yuto Mitsui, Salman Ahmed, Yasuaki Aoyama, Takafumi Koseki, “Detent Force Reduction by Positional Shifting of Permanent Magnets for a PMLSM Without Compromising Thrust”, IEEJ J. Industry Applications, vol.9, no.4, pp.376–383, 2020.
[Keywords: Permanent Magnet Linear Synchronous Motor (PMLSM), detent force reduction, high thrust density, longitudinal and transverse magnetic flux, phase shift, Harmonic analysis]

    https://www.jstage.jst.go.jp/article/ieejjia/9/4/9_376/_pdf/-char/en

[Force Control for In-Wheel-Motored EV]
Tomoki Emmei, Hiroshi Fujimoto, “Force Control of In-Wheel-Motored Electric Vehicles, IEEJ Journal of Industry Applications”, IEEJ J. Industry Applications, vol.9, no.4, pp.384–391, 2020.
[Keywords: force control, electric vehicles, in-wheel-motor, impedance control, vehicle motion control]

    https://www.jstage.jst.go.jp/article/ieejjia/9/4/9_384/_pdf/-char/en

[Wireless Power Transfer for Lunar Rover]
Bingcheng Ji, Katsuhiro Hata, Takehiro Imura, Yoichi Hori, Shuhei Shimada, Osamu Kawasaki, “Wireless Power Transfer System Design with Power Management Strategy Control for Lunar Rover”, IEEJ J. Industry Applications, vol.9, no.4, pp.392–400, 2020.
[Keywords: heat leakage, lunar rover, power management strategy, PV panel, wireless power transfer]

    https://www.jstage.jst.go.jp/article/ieejjia/9/4/9_392/_pdf/-char/en

[On board battery charging system]
Ho-Sung Kang, Seok-Min Kim, Kyo-Beum Lee, Multiple Harmonics Reduction Method for the Integrated On-board Battery Charging System of Hybrid Electric Vehicles, IEEJ Journal of Industry Applications, Volume 9, no. 3, pp. 235–243, 2020.
[Keywords: hybrid electric vehicles, integrated charging system, on-board charger, harmonic compensation method]

    https://www.jstage.jst.go.jp/article/ieejjia/9/3/9_235/_pdf/-char/en

[I-f startup method for PMSM]
Dunzhi Chen, Kaiyuan Lu, Dong Wang, An I-f Startup Method with Compensation Loops for PMSM with Smooth Transition, IEEJ Journal of Industry Applications, Volume 9, no. 3, pp. 263–270, 2020.
[Keywords: I-f startup, PMSM, sensorless drive, variable speed drives, FOC]

    https://www.jstage.jst.go.jp/article/ieejjia/9/3/9_263/_pdf/-char/en 

[Sensorless speed control for PMSM]
Junki Yoshimoto, Tetsuya Matsuyama, Simple Position Sensorless Speed Control Method for Permanent Magnet Synchronous Motors Using Flux Vector Control, IEEJ Journal of Industry Applications, Volume 9, no. 3, pp. 305–310, 2020.
[Keywords: flux vector control, maximum torque per ampere (MTPA) control, stabilization control, permanent magnet Synchronous motor, maximum torque control axis]

    https://www.jstage.jst.go.jp/article/ieejjia/9/3/9_305/_pdf/-char/en 

[Induction motor control]
Satoshi Isaka, Toshiya Yoshida,”Improving the Starting Characteristics of Single-Phase Induction Motors with an Auxiliary-Winding Current Control,”IEEJ J. Industry Applications, vol. 9, no. 1, pp. 11–16, 2020.
[Keywords:single-phase induction motor, TRIAC, resonant current, starting torque]

    https://www.jstage.jst.go.jp/article/ieejjia/9/1/9_11/_pdf/-char/ja

[Model predictive control of IPMSM]
Yushi Araki, Kodai Abe, Kiyoshi Ohishi, Yuki Yokokura, Junichi Sano, Koji Kobayashi,”Harmonic Current Reduction Control Based on Model Predictive Direct Current Control of IPMSM and Input Grid Circuit,”IEEJ J. Industry Applications, vol. 9, no. 1, pp.17–26, 2020.
[Keywords:IPMSM, electrolytic capacitorless inverter, input current harmonics]

    https://www.jstage.jst.go.jp/article/ieejjia/9/1/9_17/_pdf/-char/ja

[Induction Motor control]
Akihito Mizukoshi, Hitoshi Haga, “Control Method for Reducing the Motor Loss of Dual-inverter Fed Open-end winding Induction Motor in the Low-speed Region,”IEEJ J. Industry Applications, vol. 9, no. 1, pp.27–35 , 2020.
[Keywords:open-end winding induction motor, space-vector modulation, dual-inverter, low modulation index]

    https://www.jstage.jst.go.jp/article/ieejjia/9/1/9_27/_pdf/-char/ja

[Ultimate-high-efficiency Motor]
Yuji Enomoto, Kenta Deguchi, Takao Imagawa,”Development of an Ultimate-high-efficiency Motor by utilizing High-Bs Nanocrystalline Alloy,”IEEJ J. Industry Applications, vol. 9, no. 1, pp.102–108, 2020.
[Keywords:high-Bs nanocrystalline alloy, axial gap type motor, motor efficiency, magnetic characteristics]

    https://www.jstage.jst.go.jp/article/ieejjia/9/1/9_102/_pdf/-char/ja

[PMSM sensorless control]
S. Maekawa, M. Wu, and H. Kubota,”Position Sensorless Control Method for Permanent Magnet Synchronous Motors Using Speed Observer and Opened Phase Voltage Caused by Magnetic Saliency,”IEEJ J. Industry Applications, vol. 8, no. 6, pp. 875–883, 2019.
[Keywords: PMSM, sensorless control, saliency, opened phase voltage, sinusoidal wave drive, speed observer]

    https://www.jstage.jst.go.jp/article/ieejjia/8/6/8_875/_pdf“

[SRM control]
H. Kaimori, Y. Okamoto, and S. Wakao,”Factor Analysis of Torque Ripple Reduction in Synchronous Reluctance Motors Derived from Topology Optimization,”
IEEJ J. Industry Applications, vol. 8, no. 6, pp. 1007–1014, 2019.
[Keywords: synchronous motor, topology optimization, torque ripple, flux barrier, finite element analysis]

    https://www.jstage.jst.go.jp/article/ieejjia/8/6/8_1007/_pdf“

[IPMSM Design]
Katsumi Yamazaki, Hiroki Narushima,”Procedure for Optimization of Interior Permanent Magnet Synchronous Motors with Concentrated Windings by Considering End-Leakage Flux,”IEEJ J. Industry Applications, vol. 8, no. 5, pp. 820-826, 2019.     
[Keywords: interior permanent magnet motors, concentrated windings, end-leakage flux, optimization, finite element method]       

    https://www.jstage.jst.go.jp/article/ieejjia/8/5/8_820/_pdf

[SynRM Design]
Katsutoku Takeuchi, Makoto Matsushita,”Considerations on Torque and Power Factor Characteristics of Synchronous Reluctance Machines Based on Their Magnetic Energy Properties,”IEEJ J. Industry Applications, vol. 8, no. 5, pp. 857-866, 2019.         
[Keywords: synchronous reluctance motor, magnetic energy, magnetic co-energy, magnetic saturation, torque, power factor]         

    https://www.jstage.jst.go.jp/article/ieejjia/8/5/8_857/_pdf

[Axial PMSM Design]
Toru Ogawa, Tomohira Takahashi, Masatsugu Takemoto, Satoshi Ogasawara, Hideaki Arita, and Akihiro Daikoku”Increasing the Operating Speed of a Consequent Pole Axial Gap Motor for Higher Output Power Density,”IEEJ J. Industry Applications, vol. 8, no. 3, pp. 497-504, 2019.         
[Keywords: motor, consequent pole, ferrite permanent magnet, axial gap, variable flux]   

    https://www.jstage.jst.go.jp/article/ieejjia/8/3/8_497/_pdf

[Bearing Fault Detection]
Makoto Kanemaru, Mitsuru Tsukima, Toshihiko Miyauchi, Kazufumi Hayashi”Bearing Fault Detection in Induction Machine Based on Stator Current Spectrum Monitoring”IEEJ J.Industry Applications, vol. 7,no .3, pp. 282-288, 2018. 
[Keywords: induction motor, powder contaminated bearing, stator current power spectral density, bearing fault frequency, rotational frequency, fault detection] 

    https://www.jstage.jst.go.jp/article/ieejjia/7/3/7_282/_pdf

[Bearingless Motor Design]
Hiroya Sugimoto, Itsuki Shimura, and Akira Chiba”Principle and Test Results of Energy-Saving Effect of a Single-Drive Bearingless Motor in Cooling Fan Applications,”IEEJ J. Industry Applications, vol. 6, no. 6, pp. 456-462, 2017.   
[Keywords: bearingless motor, single-drive, energy-saving effect, efficiency enhancement]       

    https://www.jstage.jst.go.jp/article/ieejjia/6/6/6_456/_pdf

[Claw-Pole Machine Design]
Katsumi Yamazaki, Ren Suzuki, Motoharu Nuka, and Makoto Masegi, “Characteristics Analysis of Claw-Pole Alternator for Automobiles by Nonlinear Magnetic Field Decomposition for Armature Reaction,”IEEJ J. Industry Applications, vol. 6, no. 6, pp. 362-369, 2017.     
[Keywords: claw-pole alternator, armature reaction, output, finite element method]       

    https://www.jstage.jst.go.jp/article/ieejjia/6/6/6_362/_pdf

[Current Sensing]
Kei Matsuura, Yousuke Akama, Kodai Abe, Kiyoshi Ohishi, Hitoshi Haga, and Itaru Ando,”Fine Three-Phase Current Reconstruction based on Calculating the Phase-Shifted Voltage Reference Using Only the DC Current Sensor of an Inverter and Its Application to a PM Motor Drive”,IEEJ J. Industry Applications, vol.6, no.1, pp.58-65, 2017.     
[Keywords: voltage source inverter, SPMSM, current reconstruction, sensor-less] 

    https://www.jstage.jst.go.jp/article/ieejjia/6/1/6_58/_pdf

[Doubly Fed Reluctance Machine Design]
Soumitra Kunte, Mandar Bhawalkar, N. Gopalakrishnan, and Yogesh Nerkar, “Optimal Design and Comparative Analysis of Different Configurations of Brushless Doubly Fed Reluctance Machine,”IEEJ J. Industry Applications, vol. 6, no. 6, pp. 370-380, 2017.       
[Keywords: BDFRM, ducted rotors, finite element analysis, optimization] 

    https://www.jstage.jst.go.jp/article/ieejjia/6/6/6_370/_pdf

[Electric Vehicle Control]
Valentin Ivanov, Dzmitry Savitski, Klaus Augsburg, Schalk Els, Cor-Jacques Kat, Theunis Botha, Miguel Dhaens, Corina Sandu, Rui He, Sterling McBride, Angel Gabriel Alatorre Vazquez, and Alessandro Correa Victorino”Challenges of Integrated Vehicle Chassis Control: Some Findings of the European Project EVE,”IEEJ J. Industry Applications, vol. 8, no. 2, pp. 218-230, 2019.     
[Keywords:integrated chassis control, vehicle dynamics, automotive control systems, X-in-the-loop]       

    https://www.jstage.jst.go.jp/article/ieejjia/8/2/8_218/_pdf

[Finite Element Analysis]
Nguyen Gia Minh Thao, Nicolas Denis, Yenyi Wu, Shunya Odawara, and Keisuke Fujisaki”Study of the Effect of Load Torque on the Iron Losses of Permanent Magnet Motors by using Finite Element Analysis,”IEEJ J. Industry Applications, vol. 8, no. 3, pp. 522-531, 2019.
[Keywords: finite element analysis, interior permanent magnet synchronous motor, iron loss, PWM inverter, effect of load torque]         

    https://www.jstage.jst.go.jp/article/ieejjia/8/3/8_522/_pdf

[Finite Element Analysis]
Hideki Ohguchi, Satoshi Imamori, Katsumi Yamazaki, Haiyan Yui, and Masao Shuto”Analyses of Circulating-current Loss in Armature Windings and In-plane Eddy-current Loss in Electrical Steel Sheets of Permanent-magnet Synchronous Machines,”IEEJ J. Industry Applications, vol. 8, no. 3, pp. 452-457, 2019.   
[Keywords: circulating-current loss, finite element method, in-plane eddy-current loss, permanent-magnet synchronous machine]   

    https://www.jstage.jst.go.jp/article/ieejjia/8/3/8_452/_pdf

[Finite Element Analysis]
Francesco Cigarini, Shingo Ito, Stefan Troppmair, and Georg Schitter”Comparative Finite Element Analysis of a Voice Coil Actuator and a Hybrid Reluctance Actuator,”IEEJ J. Industry Applications, vol. 8, no. 2, pp. 192-199, 2019.   
[Keywords:electromagnetic actuators, high-precision motion, finite element analysis]     

    https://www.jstage.jst.go.jp/article/ieejjia/8/2/8_192/_pdf

[Finite Element Analysis]
Masafumi Fujita, Takaaki Hirose, Takashi Ueda, Hiroyuki Ishizuka, Masashi Okubo, Ken Nagakura, and Tadashi Tokumasu”Inter-strand Circulating Current Analysis of End-region Transposed Coil of Power Generator using 3D Multi-layer FEM,”IEEJ J. Industry Applications, vol. 6, no. 6, pp. 449-455, 2017.       
[Keywords: power generator, coil, strand, circulation current, multi-layer FEM, rotating machine]       

    https://www.jstage.jst.go.jp/article/ieejjia/6/6/6_449/_pdf

[Finite Element Analysis]
Hirokatsu Katagiri, Hiroyuki Sano, Kazuki Semba, Noriyo Mimura, and Takashi Yamada, “Fast Calculation of AC Copper Loss for High Speed Machines by Zooming Method,”IEEJ J. Industry Applications, vol. 6, no. 6, pp. 395-400, 2017.     [keywords:permanent magnet motor, copper loss, litz wire, finite element method, model reduction, zooming analysis]     

    https://www.jstage.jst.go.jp/article/ieejjia/6/6/6_395/_pdf

[Finite Element Analysis]
Kenta Motoyoshi, Haruyuki Kometani, Nobuyuki Sora, and Susumu Maeda, “Large-Scale 3D Electromagnetic Field Analysis for Estimation of Stator End Region Loss in Turbine Generators,”IEEJ J. Industry Applications, vol. 6, no. 6, pp. 340-345, 2017.   
[Keywords: turbine generator, eddy current loss, electromagnetic field analysis, stator end region]     

    https://www.jstage.jst.go.jp/article/ieejjia/6/6/6_340/_pdf

[Heat Sensing]
Yukiko Osawa, Seiichiro Katsura”Sensing of Heat Source in a Deep Layer by Considering Heat Propagation”IEEJ J.Industry Applications, vol. 7,no .3, pp. 229-235, 2018.   
[Keywords: thermoelectric conversion elements, estimation of heat flow, thermal diffusion equation, detection, peltier device]   

   https://www.jstage.jst.go.jp/article/ieejjia/7/3/7_229/_pdf

[Induction Motor Control]
Ufot Ufot Ekong, Mamiko Inamori, and Masayuki Morimoto”Field-Weakening Control for Torque and Efficiency Optimization of a Four-Switch Three-Phase Inverter-Fed Induction Motor Drive,”IEEJ J. Industry Applications, vol. 8, no. 3, pp. 548-555, 2019.
[Keywords: fault tolerant control, vector control, flux weakening control]       

    https://www.jstage.jst.go.jp/article/ieejjia/8/3/8_548/_pdf

[Induction Motor Control]
Shrinathan Esakimuthu Pandarakone, Yukio Mizuno, and Hisahide Nakamura”Online Slight Inter-Turn Short-Circuit Fault Diagnosis Using the Distortion Ratio of Load Current in a Low-Voltage Induction Motor,”IEEJ J. Industry Applications, vol. 7, no. 6, pp. 473-478, 2018.     
[Keywords: diagnosis, distortionratio, frequency analysis, inductionmotor, insulationfailure, one-turn short-circuitfailure, support vector machine]     

    https://www.jstage.jst.go.jp/article/ieejjia/7/6/7_473/_pdf

[Induction Motor Control]
Ufot Ufot Ekong, Mamiko Inamori, and Masayuki Morimoto, “Instantaneous Vector Control of Four Switch Three Phase Inverter Fed Induction Motor Drive,”IEEJ J. Industry Applications, vol. 6, no. 6, pp. 429-434, 2017.   [keywords:emergency drive, electric vehicles, field orirntd control,two phase inverter, transformation matrix]   

    https://www.jstage.jst.go.jp/article/ieejjia/6/6/6_429/_pdf

[Induction Motor Design]
Kenta Takishima and Kazuto Sakai”Starting Characteristics of Axial and Radial Type Ultra-Lightweight Motors Based on Magnetic Resonance Coupling,”IEEJ J. Industry Applications, vol. 8, no. 3, pp. 471-479, 2019.     
[Keywords: aircraft, coreless, electric vehicle, induction motors, light weight, magnetic resonance]     

    https://www.jstage.jst.go.jp/article/ieejjia/8/3/8_471/_pdf

[Inductive Power Transfer]
Keisuke Kusaka, Kent Inoue, and Jun-ichi Itoh”Inductive Power Transfer System for an Excavator by considering Large Load Fluctuation,”IEEJ J. Industry Applications, vol. 8, no. 3, pp. 413-420, 2019. 
[Keywords: inductive power transfer, excavator, series-parallel compensation, pneumatic caisson method] 

    https://www.jstage.jst.go.jp/article/ieejjia/8/3/8_413/_pdf

[IPMSM Control]
Jun-ichi Itoh, Takato Toi, and Koroku Nishizawa, “Stabilization Method for IPMSM with Long Electrical Time Constant Using Equivalent Resistance Gain Based on V/f Control,” IEEJ J. Industry Applications, vol. 8, no. 4, pp. 592–599, 2019.   
[Keywords: damping control, IPMSM, root locus, V/f control]     

    https://www.jstage.jst.go.jp/article/ieejjia/8/4/8_592/_pdf

[IPMSM Control]
Kodai Abe, Hitoshi Haga, Kiyoshi Ohishi, Yuki Yokokura, and Haruya Kada”Source Current Harmonics and Motor Copper Loss Reduction Control of Electrolytic Capacitor-less Inverter for IPMSM Drive,”IEEJ J. Industry Applications, vol. 8, no. 3, pp. 404-412, 2019.     
[Keywords: electrolytic capacitor-less inverter, IPMSM, copper loss, initial condition response]         

    https://www.jstage.jst.go.jp/article/ieejjia/8/3/8_404/_pdf

[IPMSM Control]
Yousuke Akama, Kodai Abe, Yushi Araki, Kiyoshi Ohishi, Yuki Yokokura, Koji Kobayashi, and Tatsuki Kashihara”Predictive Direct DC-link Current Control of IPMSM Drive System Using Electrolytic Capacitorless Inverter for Fine Harmonics Suppression,”IEEJ J. Industry Applications, vol. 8, no. 3, pp. 394-403, 2019. 
[Keywords: IPMSM, electrolytic capacitorless inverter, source current harmonics]         

    https://www.jstage.jst.go.jp/article/ieejjia/8/3/8_394/_pdf

[IPMSM Control]
Atsushi Shinohara, Yukinori Inoue, Shigeo Morimoto, and Masayuki Sanada,”Correction Method of Reference Flux for Maximum Torque per Ampere Control in Direct-Torque-Controlled IPMSM Drives”,IEEJ J. Industry Applications, vol.6, no.1, pp.12-18, 2017.       
[Keywords: permanent magnet synchronous motors, direct torque control, maximum torque per ampere control, local search algorithm]       

    https://www.jstage.jst.go.jp/article/ieejjia/6/1/6_12/_pdf

[IPMSM Control]
Kodai Abe, Hitoshi Haga, Kiyoshi Ohishi, and Yuki Yokokura,”Current Ripple Suppression Control Based on Prediction of Resonance Cancellation Voltage for Electrolytic-Capacitor-Less Inverter”,IEEJ J. Industry Applications, vol.6, no.1, pp.1-11, 2017.       
[Keywords: electrolytic capacitor less inverter, IPMSM, input current ripple, LC resonance, damping control]     

    https://www.jstage.jst.go.jp/article/ieejjia/6/1/6_1/_pdf

[IPMSM Design]
Akihiro Ura, Masayuki Sanada, Shigeo Morimoto, and Yukinori Inoue”Influence of Structural Differences on Motor Characteristics of Concentrated Winding IPMSMs Obtained by Automatic Design,”IEEJ J. Industry Applications, vol. 8, no. 3, pp. 458-464, 2019.   
[Keywords: automatic design, genetic algorithm (GA), interior permanent magnet synchronous motor (IPMSM), eddy current loss]     

    https://www.jstage.jst.go.jp/article/ieejjia/8/3/8_458/_pdf

[IPMSM Design]
Makoto Ito, Shinji Sugimoto, Akeshi Takahashi, & Shuichi Tamiya”A Narrow Bridge Structure for Reduction of the Flux Leakage,”IEEJ J. Industry Applications, vol. 7, no. 6, pp. 517-524, 2018.   
[Keywords: PMSM, bridge, ?ux leakage, non-magnetic material]     

    https://www.jstage.jst.go.jp/article/ieejjia/7/6/7_517/_pdf

[IPMSM Design]
Thanh Anh Huynh, and Min-Fu Hsieh, “Performance Evaluation of Interior Permanent Magnet Motors Using Thin Electrical Steels,”IEEJ J. Industry Applications, vol. 6, no. 6, pp. 422-428, 2017.   [keywords:traction motor, IPM motor, thin lamination, field-weakening control]   

    https://www.jstage.jst.go.jp/article/ieejjia/6/6/6_422/_pdf

[IPMSM Design]
Yuki Shimizu, Shigeo Morimoto, Masayuki Sanada, and Yukinori Inoue, “Influence of Permanent Magnet Properties and Arrangement on Performance of IPMSMs for Automotive Applications,”IEEJ J. Industry Applications, vol. 6, no. 6, pp. 401-408, 2017.    [keywords:interior permanent magnet synchronous motor(IPMSM), traction motor, strong magnet, magnet arrangement emission test cycle]     

    https://www.jstage.jst.go.jp/article/ieejjia/6/6/6_401/_pdf

[IPMSM Design]
Nicolas Denis, Yenyi Wu, and Keisuke Fujisaki, “Impact of the Inverter DC Bus Voltage on the Iron Losses of a Permanent Magnet Synchronous Motor at Constant Speed,””IEEJ J. Industry Applications, vol. 6, no. 6, pp. 346-352, 2017. 
[Keywords: inverter, iron loss, magnetic material, permanent magnet synchronous motor]   

    https://www.jstage.jst.go.jp/article/ieejjia/6/6/6_346/_pdf

[Linear Actuator]
Douglas Martins Araujo, Faguy Tamwo Simo, and Yves Perriard”General Sensorless Method with Parameter Identification and Double Kalman Filter Applied to a Bistable Fast Linear Switched Reluctance Actuator for Textile Machine,”IEEJ J. Industry Applications, vol. 8, no. 1, pp. 33-40, 2019.         
[Keywords: actuator, experimental validation, Kalman filter, linear switched reluctance, position control, sensorless]   

    https://www.jstage.jst.go.jp/article/ieejjia/8/1/8_33/_pdf

[Linear Actuator]
Takuya Noguchi, Sakahisa Nagai, Atsuo Kawamura”Electromagnetic Linear Actuator providing High Force Density per Unit Area without Position Sensor as a Tactile Cell”IEEJ J.Industry Applications, vol. 7,no .3, pp. 259-265, 2018.     
[Keywords: actuator, tactile display, haptics]   

   https://www.jstage.jst.go.jp/article/ieejjia/7/3/7_259/_pdf

[Modelling of Common Mode Chokes]
Katsuya Nomura, Takashi Kojima, and Yoshiyuki Hattori”Straightforward Modeling of Complex Permeability for Common Mode Chokes,”IEEJ J. Industry Applications, vol. 7, no. 6, pp. 462-472, 2018.         
[Keywords:common mode choke, electromagnetic interference, equivalent circuit, filter]   

    https://www.jstage.jst.go.jp/article/ieejjia/7/6/7_462/_pdf

[Modelling of PMSM]
Hiroyuki Kaimori, and Kan Akatsu”Behavior Modeling of Permanent Magnet Synchronous Motors Using Flux Linkages for Coupling with Circuit Simulation, IEEJ J. Industry Applications, vol. 7, no. 1, pp. 56-63, 2018.     
[Keywords: behavior modeling, cross-coupling, spatial harmonics, coupled analysis, finite element analysis (FEA), permanent magnet synchronous motor (PMSM)]     

   https://www.jstage.jst.go.jp/article/ieejjia/7/1/7_56/_pdf

[PMSG Design]
Takeo Ishikawa, Taiki Watanabe, and Nobuyuki Kurita, “Effect of Cleaning Level on Topology Optimization of Permanent Magnet Synchronous Generator,”IEEJ J. Industry Applications, vol. 6, no. 6, pp. 416-421, 2017.     [keywords:interior permanent magnet machine, genetic algorithm, topology optimization]   

    https://www.jstage.jst.go.jp/article/ieejjia/6/6/6_416/_pdf

[PMSM Conrol]
Ryo Tanabe, and Kan Akatsu, “Advanced Torque Control of Permanent Magnet Synchronous Motor Using Finite Element Analysis Based Motor Model with a Real-time Simulator”,IEEJ J. Industry Applications, vol.6, no.3, pp.173-180, 2017.   
[Keywords: behavior motor model, direct torque control, permanent magnet synchronous motor control, real-time simulator]         

    https://www.jstage.jst.go.jp/article/ieejjia/6/3/6_173/_pdf

[PMSM Control]
Jongwon Heo, Keiichiro Kondo”Maximum Continuous Operation Time Control of PMSM with Compressor Loads of Air Conditioners under DC Power Supply Loss”IEEJ J.Industry Applications, vol. 7,no .3, pp. 268-269, 2018.     
[Keywords: PMSM, power supply loss, continuous operation, low inertial loads]   

    https://www.jstage.jst.go.jp/article/ieejjia/7/3/7_268/_pdf

[PMSM Control]
Yoshiaki Seki, Kiyoshi Ohishi, Yuki Yokokura, Toshiki Sano, Yuji Ide, Daigo Kuraishi, and Akihiko Takahashi,”Robust Positioning Control Using a-b Stationary Frame Current Controller and Disturbance Torque Hybrid Observer”,IEEJ J. Industry Applications, vol.6, no.2, pp.73-82, 2017.       
[Keywords: PMSM, positioning control, robust control, disturbance observer, torque ripple suppression]   

    https://www.jstage.jst.go.jp/article/ieejjia/6/2/6_73/_pdf

[PMSM Control]
Akira Satake, Yuriko Okamoto, and Satoru Kato,”Design of Coupling Cancellation Control for a Double-winding PMSM”,IEEJ J. Industry Applications, vol.6, no.1, pp.29-35, 2017.   
[Keywords: double-winding, permanent magnet synchronous motor, motor model, coupling, cancellation]     

    https://www.jstage.jst.go.jp/article/ieejjia/6/1/6_29/_pdf

[PMSM Design]
Ryoichi Takahata, Shinichi Wakui, Kenji Miyata, Keiji Noma, and Masaharu Senoo”Influence of Rotor Eccentricity on Vibration Characteristics of Permanent Magnet Synchronous Motor,”IEEJ J. Industry Applications, vol. 8, no. 3, pp. 558-565, 2019.     
[Keywords: permanent magnet synchronous motor, rotor eccentricity, radial electromagnetic force, vibration acceleration]         

    https://www.jstage.jst.go.jp/article/ieejjia/8/3/8_558/_pdf

[Position Sensorless Control]
Sari Maekawa, Mariko Sugimoto, Keiichi Ishida, Masaya Nogi,and Masaki Kanamori, “Stability Analysis of Sensorless Speed Control for PMSM Considered Current Control System,” IEEJ J. Industry Applications, vol. 8, no. 4, pp. 736–744, 2019. 
[Keywords: PMSM, sensorless control, ASR, ACR, stability]       

    https://www.jstage.jst.go.jp/article/ieejjia/8/4/8_736/_pdf

[Position Sensorless Control]
Hamin Song, and Shinji Doki”Evaluation Method to Estimate Position Control Error in Position Sensorless Control Based on Pattern Matching Method,”IEEJ J. Industry Applications, vol. 7, no. 1, pp. 73-79, 2018.       
[Keywords: interior permanent magnet synchronous motor, position sensorless control, pattern matching, position control error, evaluation method, magnetic saturation]   

    https://www.jstage.jst.go.jp/article/ieejjia/7/1/7_73/_pdf

[Position Sensorless Control]
Ryota Takahashi, Kiyoshi Ohishi, Yuki Yokokura, Hitoshi Haga, and Tenjiroh Hiwatari, “Stationary Reference Frame Position Sensorless Control Based on Stator Flux Linkage and Sinusoidal Current Tracking Controller for IPMSM”,IEEJ J. Industry Applications, vol.6, no.3, pp.181-191, 2017.   
[Keywords: IPMSM, position sensorless control, disturbance suppression characteristics, stationary reference frame, sinusoidal tracking current controller]     

    https://www.jstage.jst.go.jp/article/ieejjia/6/3/6_181/_pdf

[Position Sensorless Control]
Yosuke Nakayama, Atsushi Matsumoto, and Masaru Hasegawa,”Position Sensorless Control System within Over-modulation Range Based on Mathematical Model Robust against Magnetic Saturation of IPMSMs”,IEEJ J. Industry Applications, vol.6, no.1, pp.36-45, 2017. 

[Keywords: IPMSM, position sensorless control, magnetic saturation, over modulation, comb filter]       

    https://www.jstage.jst.go.jp/article/ieejjia/6/1/6_36/_pdf

[Position Sensorless Control of PMSM]
Kosuke Kondo, and Shinji Doki, “Position Estimation System for PMSM Position Sensorless Control in Inverter Overmodulation Drive”,IEEJ J. Industry Applications, vol.6, no.3, pp.165-172, 2017.         
[Keywords: PMSM, position sensorless control, overmodulation drive, harmonics compensation]     

    https://www.jstage.jst.go.jp/article/ieejjia/6/3/6_165/_pdf

[Position Sonsoless Control]
Dongwoo Lee, and Kan Akatsu, “Selection Method of Controller Gains for Position Sensorless Control of IPMSM Drives,” IEEJ J. Industry Applications, vol. 8, no. 4, pp. 720–726, 2019. 
[Keywords: interior permanent magnet synchronous motor, sensorless control, extended EMF estimator, PLL-type estimator] 

    https://www.jstage.jst.go.jp/article/ieejjia/8/4/8_720/_pdf

[Rail Vehicle Control]
Akiyoshi Yamamura, and Norio Tomii”Indices for Delay Reduction Measures based on Analysis of Historical Train Traffic Records in Dense Railway Networks,”IEEJ J. Industry Applications, vol. 8, no. 2, pp. 370-378, 2019.       
[Keywords:train delay, train delay index, historical train traffic records, delay reduction measures]   

    https://www.jstage.jst.go.jp/article/ieejjia/8/2/8_370/_pdf

[Rail Vehicle Control]
Hiroyasu Kobayashi, Keiichiro Kondo, Tetsuya Iwasaki, Akihiro Tsumura”Experimental Study on Increasing Regenerative Power by Improving Regenerative Brake Control of Rail Vehicles in DC-electrified Railways”IEEJ J.Industry Applications, vol. 7,no .3, pp. 266-267, 2018.   
[Keywords: DC-electrified railway system, regenerative brake control, on-track test, regenerative power]         

    https://www.jstage.jst.go.jp/article/ieejjia/7/3/7_266/_pdf

[SPMSM Design]
Kenta Yamano, Shigeo Morimoto, Masayuki Sanada, and Yukinori Inoue, “Design of Surface Permanent Magnet Synchronous Motor Using Design Assist System for PMSM,”IEEJ J. Industry Applications, vol. 6, no. 6, pp. 409-415, 2017. [keywords:SPMSM, motor parameters, magnetic circuit, permeance model]   

    https://www.jstage.jst.go.jp/article/ieejjia/6/6/6_409/_pdf

[Stepping Motor Control]
Kenshi Matsuo, Zheng Xiang, Takeshi Miura, and Katsubumi Tajima”Automatic Tuning of Pulse Timings Using Neural Network for Rotor Oscillation Damping of a Stepping Motor,”IEEJ J. Industry Applications, vol. 7, no. 5, pp. 443-444, 2018.     
[Keywords: stepping motor, rotor oscillation damping, back-phasing damping, neural network]     

    https://www.jstage.jst.go.jp/article/ieejjia/7/5/7_443/_pdf

[Stepping Motor Design]
Norio Miyauchi”Reduction of the Power Consumption of a Stepping Motor for Driving the Hands of Wristwatches,”IEEJ J. Industry Applications, vol. 8, no. 1, pp. 140-141, 2019.   
[Keywords: drive current, detent torque, pull-out torque]       

    https://www.jstage.jst.go.jp/article/ieejjia/8/1/8_140/_pdf

[SynRM Design]
Yuuto Yamamoto, Shigeo Morimoto, Masayuki Sanada, and Yukinori Inoue”Reduction of Torque Ripple in Synchronous Reluctance Motor by Combining Different Flux Barrier Structures,”IEEJ J. Industry Applications, vol. 8, no. 3, pp. 430-436, 2019.       
[Keywords: synchronous reluctance motor, rare-earth-free motor, torque ripple reduction, asymmetric flux barriers]       

    https://www.jstage.jst.go.jp/article/ieejjia/8/3/8_430/_pdf

[Torque Sensorless Control]
Takumi Kurosawa, and Yasutaka Fujimoto,”Torque Sensorless Control for an Electric Power Assisted Bicycle with Instantaneous Pedaling Torque Estimation”,IEEJ J. Industry Applications, vol.6, no.2, pp.124-129, 2017.   
[Keywords: electric power assisted bicycle, Recursive least squares method, disturbance observer, pedaling torque estimator]     

    https://www.jstage.jst.go.jp/article/ieejjia/6/2/6_124/_pdf

[Variable Flux Motor Deign]
Shin Kusase, and Kazumi Kurihara, “A Proposal for a New Variable Leakage Flux Motor with Interpolar Gap and Permanent Magnets,”IEEJ J. Industry Applications, vol. 6, no. 6, pp. 381-386, 2017. [keywords:hybrid field motor, variable field, bypass yoke core] 

    https://www.jstage.jst.go.jp/article/ieejjia/6/6/6_381/_pdf

[Variable Flux Motor Design]
Kazuto Sakai, and Kouki Matsuda,”Permanent Magnet Motor with Reversible Salient Poles and Variable Magnetic Force”,I,EEJ J. Industry Applications, vol.6, no.1, pp.19-28, 2017.
[Keywords: permanent magnet motor, salient pole, magnetization, variable speed, high efficiency]         

    https://www.jstage.jst.go.jp/article/ieejjia/6/1/6_19/_pdf

[Varible Flux Motor Design]
Masahiro Aoyama, Kazukiyo Nakajima, Toshihiko Noguchi”Proposal and Preliminary Experimental Verification of Electrically Reversal Magnetic Pole Type Variable Magnetic Flux PM Motor”IEEJ J.Industry Applications, vol. 7,no .3, pp. 270-281, 2018.     
[Keywords: variable magnetic flux PM motor, self-excitation, space harmonics, toroidally-concentrated winding stator, threedimensional magnetic flux path]       

    https://www.jstage.jst.go.jp/article/ieejjia/7/3/7_270/_pdf

[Robust Torque Estimation]
Shota Yamada, Hiroshi Fujimoto, “Minimum-Variance Load-Side External Torque Estimation Robust Against Modeling and Measurement Errors”, IEEJ J. Industry Applications, vol.9, no.2, pp.117–124, 2020.
[Keywords:estimation, force sensing, reaction force observer, torque sensing, two-inertia system, two-mass system]

    https://www.jstage.jst.go.jp/article/ieejjia/9/2/9_117/_pdf/-char/en

[Iterative Learning Control for Driven Stage]
Takumi Hayashi, Hiroshi Fujimoto, Yoshihiro Isaoka, Yuki Terada, “Projection-based Iterative Learning Control for Ball-screw-driven Stage with Consideration of Rolling Friction Compensation”, IEEJ J. Industry Applications, vol.9, no.2, pp.132–139, 2020.
[Keywords:iterative learning control, projection-based iterative learning control, ball-screw-driven stage, rolling friction]

    https://www.jstage.jst.go.jp/article/ieejjia/9/2/9_132/_pdf/-char/en

[Velocity Driven N-order Stick Compensator and Slip Suppressor]
Juan Padron, Kiyoshi Ohishi, Yuki Yokokura, Toshimasa Miyazaki, “Velocity Driven N-order Stick Compensator and Slip Suppressor for Nonlinear Friction in an Oil-Seal-Mounted Geared Motor”, IEEJ J. Industry Applications, vol.9, no.2, pp.168–176, 2020.
[Keywords:nonlinear friction, geared motor, disturbance observer, stick-slip, oil seal]

    https://www.jstage.jst.go.jp/article/ieejjia/9/2/9_168/_pdf/-char/en

[Cross-coupled 2-DOF SPM Motor]
Yoshiyuki Hatta, Tomoyuki Shimono, “Analysis and Experimental Verification of Cross-coupled 2-DOF SPM Motor with Halbach Array”, IEEJ J. Industry Applications, vol.9, no.2, pp.177–190, 2020.
[Keywords:2-DOF motor, halbach array, direct drive, multi degrees of freedom, linear motion, rotational motion]

    https://www.jstage.jst.go.jp/article/ieejjia/9/2/9_177/_pdf/-char/en

[Vibration Reduction of a Stepping Motor]
Kenshi Matsuo, Takeshi Miura, Katsubumi Tajima, “Vibration Reduction of a Stepping Motor Using a Pre-compensator to Remove Control Delay”, IEEJ J. Industry Applications, vol.9, no.2, pp.191–192, 2020.
[Keywords: stepping motor, vibration reduction, pre-compensator, Butterworth filter, zero-phase filter]

    https://www.jstage.jst.go.jp/article/ieejjia/9/2/9_191/_pdf/-char/en

[Energy-Saving Train Scheduling]
Shoichiro Watanabe, Yasuhiro Sato, Takafumi Koseki, Takeshi Mizuma, Ryuji Tanaka, Yoshihiro Miyaji, Eisuke Isobe, “Verification of Optimized Energy-Saving Train Scheduling Utilizing Automatic Train Operation System”, IEEJ J. Industry Applications, vol.9, no.2, pp.193–200, 2020.
[Keywords:automatic train operation, linear motor railway system, scheduling, optimization problem, energy-saving operation, hidden time]

    https://www.jstage.jst.go.jp/article/ieejjia/9/2/9_193/_pdf/-char/en

[Electric Motor Thrust]
Shumpei Hayashi, Hiroshi Hashimoto, Takashi Tokuyama, Takuya Matsumoto, Tsuyoshi Miyazaki, “Improvement of Electric Motor Thrust by Three-Dimensional Magnetic Pole Structure”, IEEJ J. Industry Applications, vol.9, no.2, pp.201–207, 2020.
[Keywords:linear moter, high thrust]

    https://www.jstage.jst.go.jp/article/ieejjia/9/2/9_201/_pdf/-char/en

############################################